RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Microchip KSZ8091RNBCA-G3XX-TR

ManufacturerMicrochip
SeriesKSZ8091
Part NumberKSZ8091RNBCA-G3XX-TR

The KSZ8091 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable

Datasheets

  • Download » Datasheet, PDF, 1.1 Mb, 11-03-2016
    KSZ8091MLX - 10Base-T/100Base-TX PHY
    Docket ↓
    KSZ8091MLX
    10BASE-T/100BASE-TX
    Physical Layer Transceiver
    Features Target Applications Single-Chip 10BASE-T/100BASE-TX IEEE 802.3
    Compliant Ethernet Transceiver MII Interface Support Back-to-Back Mode Support for a 100 Mbps Copper Repeater MDC/MDIO Management Interface for PHY Register Configuration Programmable Interrupt Output LED Outputs for Link, Activity, and Speed Status
    Indication On-Chip Termination Resistors for the Differential
    Pairs Baseline Wander Correction HP Auto MDI/MDI-X to Reliably Detect and Correct Straight-Through and Crossover Cable Connections with Disable and Enable Option Auto-Negotiation to Automatically Select the
    Highest Link-Up Speed (10/100 Mbps) and
    Duplex (Half/Full) Energy Efficient Ethernet (EEE) Support with
    Low-Power Idle (LPI) Mode and Clock Stoppage
    for 100BASE-TX and Transmit Amplitude Reduction with 10BASE-Te Option Wake-on-LAN (WOL) Support with Either Magic
    Packet, Link Status Change, or Robust CustomPacket Detection LinkMD® TDR-Based Cable Diagnostics to Identify Faulty Copper Cabling HBM ESD Rating (6 kV) Parametric NAND Tree Support for Fault Detection Between Chip I/Os and the Board Loopback Modes for Diagnostics Power-Down and Power-Saving Modes Single 3.3V Power Supply with VDD I/O Options
    for 1.8V, 2.5V, or 3.3V Built-In 1.2V Regulator for Core Available in 48-Pin 7 mm x 7 mm LQFP Package  2016 Microchip Technology Inc. Game Consoles
    IP Phones
    IP Set-Top Boxes
    IP TVs
    LOM
    Printers DS00002297A-page 1 KSZ8091MLX
    TO OUR VALUED CUSTOMERS
    It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip
    products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and
    enhanced as new volumes and updates are introduced.
    If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via ...
  • Download » Datasheet, PDF, 1.4 Mb, 09-15-2016
    KSZ8091MNX/RNB - 10Base-T/100Base-TX PHY
    Docket ↓
    KSZ8091MNX/RNB
    10BASE-T/100BASE-TX
    Physical Layer Transceiver
    Features Target Applications Single-Chip 10BASE-T/100BASE-TX IEEE 802.3
    Compliant Ethernet Transceiver MII Interface Support (KSZ8091MNX) RMII v1.2 interface support with a 50 MHz reference clock output to MAC, and an option to input
    a 50 MHz reference clock (KSZ8091RNB) Back-to-Back Mode Support for a 100 Mbps Copper Repeater MDC/MDIO Management Interface for PHY Register Configuration Programmable Interrupt Output LED Outputs for Link and Activity Status Indication, plus speed indication for KSZ8091RNB On-Chip Termination Resistors for the Differential
    Pairs Baseline Wander Correction HP Auto MDI/MDI-X to Reliably Detect and Correct Straight-Through and Crossover Cable Connections with Disable and Enable Option Auto-Negotiation to Automatically Select the
    Highest Link-Up Speed (10/100 Mbps) and
    Duplex (Half/Full) Energy Efficient Ethernet (EEE) Support with
    Low-Power Idle (LPI) Mode and Clock Stoppage
    (MII Version Only) for 100BASE-TX and Transmit
    Amplitude Reduction with 10BASE-Te Option Wake-on-LAN (WOL) Support with Either Magic
    Packet, Link Status Change, or Robust CustomPacket Detection HBM ESD Rating (6 kV) Power-Down and Power-Saving Modes LinkMD® TDR-Based Cable Diagnostics to Identify Faulty Copper Cabling Parametric NAND Tree Support for Fault Detection Between Chip I/Os and the Board Loopback Modes for Diagnostics Single 3.3V Power Supply with VDD I/O Options
    for 1.8V, 2.5V, or 3.3V Built-In 1.2V Regulator for Core Available in 32-pin 5 mm x 5 mm QFN Package  2016 Microchip Technology Inc. Game Consoles
    IP Phones
    IP Set-Top Boxes
    IP TVs
    LOM
    Printers DS00002275A-page 1 KSZ8091MNX/RNB
    TO OUR VALUED CUSTOMERS
    It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip
    products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and
    enhanced as new volumes and updates are introduced. ...
  • Download » Datasheet, PDF, 1.2 Mb, 11-03-2016
    KSZ8091RNA/RND - 10Base-T/100Base-TX PHY
    Docket ↓
    KSZ8091RNA/RND
    10BASE-T/100BASE-TX PHY
    with RMII and EEE Support
    Features Target Applications Single-Chip 10BASE-T/100BASE-TX IEEE 802.3
    Compliant Ethernet Transceiver RMII V1.2 Interface Support with a 50 MHz Reference Clock Output to MAC, and an Option to
    Input a 50 MHz Reference Clock RMII Back-to-Back Mode Support for a 100 Mbps
    Copper Repeater MDC/MDIO Management Interface for PHY Register Configuration Programmable Interrupt Output LED Outputs for Link and Activity Status Indication On-Chip Termination Resistors for the Differential
    Pairs Baseline Wander Correction HP Auto MDI/MDI-X to Reliably Detect and Correct Straight-Through and Crossover Cable Connections with Disable and Enable Option Auto-Negotiation to Automatically Select the
    Highest Link-Up Speed (10/100 Mbps) and
    Duplex (Half/Full) Energy Efficient Ethernet (EEE) Support with
    Low-Power Idle (LPI) Mode for 100BASE-TX and
    Transmit Amplitude Reduction with 10BASE-TE
    Option Wake-on-LAN (WoL) Support with Either Magic
    Packet, Link Status Change, or Robust CustomPacket Detection LinkMD® TDR-Based Cable Diagnostics to Identify Faulty Copper Cabling HBM ESD Rating (6 kV) Parametric NAND Tree Support for Fault Detection Between Chip I/Os and the Board Loopback Modes for Diagnostics Power-Down and Power-Saving Modes Single 3.3V Power Supply with VDD I/O Options
    for 1.8V, 2.5V, or 3.3V Built-In 1.2V Regulator for Core Available in 24-Pin (4 mm × 4 mm) QFN Package  2016 Microchip Technology Inc. Game Consoles
    IP Phones
    IP Set-Top Boxes
    IP TVs
    LOM
    Printers DS00002298A-page 1 KSZ8091RNA/RND
    TO OUR VALUED CUSTOMERS
    It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip
    products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and ...

Prices

Status

Lifecycle StatusProduction (Appropriate for new designs but newer alternatives may exist)

Packaging

PackageVQFN
Pins32

Parametrics

# Ethernet Ports1
Automotive GradeNo
Cable DiagnosticsYes
EEEYes
Ethernet Bandwidth10/100Mbps
Fiber SupportNo
InterfaceMII/RMII
LEDs2
On-Chip TerminationYes
Op. Voltage3.3 V
Temp Range Max.(° C)85
Temp Range Min.(° C)-40
Vdd I/O1.8/2.5/3.3 V
WOLYes

Eco Plan

RoHSCompliant

Moldel Line

Series: KSZ8091 (16)

Manufacturer's Classification

  • High-Speed Networking and Video > Ethernet > Ethernet PHYs

Other Names:

KSZ8091RNBCAG3XXTR, KSZ8091RNBCA G3XX TR

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus