RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Microchip KSZ8995FQI

ManufacturerMicrochip
SeriesKSZ8995
Part NumberKSZ8995FQI

Please consider this device KSZ8895, KSZ8795 View Side By Side Comparison

Datasheets

  • Download » Datasheet PDF, 201 Kb, File published: Apr 19, 2016
    KSZ8995E Data Sheet
    Docket ↓
    KS8995E Micrel KS8995E
    5-Port 10/100 Integrated Switch with PHY and Frame Buffer
    Rev. 1.10
    On the media side, the KS8995E supports 10BaseT,
    100BaseTX and 100BaseFX as specified by the IEEE 802.3
    committee.
    Physical signal transmission and reception are enhanced
    through use of analog circuitry that makes the design more
    efficient and allows for lower power consumption and smaller
    chip die size.
    The major enhancements from the KS8995 to the KS8995E
    are support for VLAN, traffic priority queuing, EEPROM
    programming for expanded control, MDI/MDI-X auto crossover.
    Data sheets and support documentation can be found on
    Micrel’s web site at www.micrel.com. General Description
    The KS8995E contains five 10/100 physical layer transceivers, five MAC (Media Access Control) units with an integrated
    layer 2 switch. The device runs in two modes. The first mode
    is a five port integrated switch and the second is as a five port
    switch with the fifth port decoupled from the physical port. In
    this mode access to the fifth MAC is provided using an MII
    (Media Independent Interface).
    Useful configurations include a stand alone five port switch as
    well as a four port switch with a routing element connected to ...
  • Download » Datasheet PDF, 816 Kb, File published: Apr 19, 2016
    KSZ8995M Data Sheet
    Docket ↓
    KS8995M Micrel, Inc. KS8995M
    Integrated 5-Port 10/100 Managed Switch
    Rev 1.13 General Description Features The KS8995M is a highly integrated Layer-2 managed switch
    with optimized BOM (Bill of Materials) cost for low port count,
    cost-sensitive 10/100Mbps switch systems. It also provides
    an extensive feature set such as tag/port-based VLAN, QoS
    (Quality of Service) priority, management, MIB counters, dual
    MII interfaces and CPU control/data interfaces to effectively
    address both current and emerging Fast Ethernet applications.
    The KS8995M contains five 10/100 transceivers with patented mixed-signal low-power technology, five MAC (Media
    Access Control) units, a high-speed non-blocking switch
    fabric, a dedicated address look-up engine, and an on-chip
    frame buffer memory.
    All PHY units support 10BaseT and 100BaseTX. In addition,
    two of the PHY units support 100BaseFX (Ports 4 and 5).
    All support documentation can be found on Micrel’s web site
    at: www.micrel.com. Integrated switch with five MACs and five Fast Ethernet
    transceivers fully compliant to IEEE 802.3u standard Shared memory based switch fabric with fully nonblocking configuration 1.4Gbps high-performance memory bandwidth 10BaseT, 100BaseTX and 100BaseFX modes (FX in
    Ports 4 and 5) Dual MII configuration: MII-Switch (MAC or PHY mode
    MII) and MII-P5 (PHY mode MII) IEEE 802.1q tag-based VLAN (16 VLANs, full-range
    VID) for DMZ port, WAN/LAN separation or inter-VLAN
    switch links VLAN ID tag/untag options, per-port basis Programmable rate limiting 0Mbps to 100Mbps, ingress
    and egress port, rate options for high and low priority, ...
  • Download » Datasheet PDF, 1.1 Mb, File published: Apr 19, 2016
    KSZ8995MA Data Sheet
    Docket ↓
    KS8995MA/FQ
    Integrated 5-Port 10/100 Managed Switch
    Rev. 3.0 General Description
    The KS8995MA/FQ is a highly-integrated Layer 2
    managed switch with optimized bill of materials (BOM)
    cost for low port count, cost-sensitive 10/100Mbps switch
    systems with both copper and optic fiber media.
    It also provides an extensive feature set such as tag/portbased VLAN, quality of service (QoS) priority,
    management, MIB counters, dual MII interfaces and CPU
    control/data interfaces to effectively address both current
    and emerging fast Ethernet applications.
    The KS8995MA/FQ contains five 10/100 transceivers with
    patented mixed-signal low-power technology, five media
    access control (MAC) units, a high-speed non-blocking
    switch fabric, a dedicated address lookup engine, and an
    on-chip frame buffer memory. All PHY units support 10BASE-T and 100BASE-TX.
    In addition, two of the PHY units support 100BASE-FX on
    ports 4 and 5 for KSZ8995MA, two of the PHY units
    support 100BASE-FX on ports 3 and 4 for KSZ8995FQ.
    Datasheets and support documentation can be found on
    Micrel’s web site at: www.micrel.com. Functional Diagram Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 http://www.micrel.com October 2011 M9999-102611-3.0 Micrel, Inc. KS8995MA/FQ Features Integrated switch with five MACs and five fast
    Ethernet transceivers fully-compliant to IEEE 802.3u
    standard Shared memory based switch fabric with fully nonblocking configuration 1.4Gbps high-performance memory bandwidth 10BASE-T, 100BASE-TX, and 100BASE-FX modes Dual MII configuration: MII-Switch (MAC or PHY ...
  • Download » Datasheet PDF, 1.1 Mb, File published: Apr 19, 2016
    KSZ8995MA_FQ Data Sheet
    Docket ↓
    KS8995MA/FQ
    Integrated 5-Port 10/100 Managed Switch
    Rev. 3.0 General Description
    The KS8995MA/FQ is a highly-integrated Layer 2
    managed switch with optimized bill of materials (BOM)
    cost for low port count, cost-sensitive 10/100Mbps switch
    systems with both copper and optic fiber media.
    It also provides an extensive feature set such as tag/portbased VLAN, quality of service (QoS) priority,
    management, MIB counters, dual MII interfaces and CPU
    control/data interfaces to effectively address both current
    and emerging fast Ethernet applications.
    The KS8995MA/FQ contains five 10/100 transceivers with
    patented mixed-signal low-power technology, five media
    access control (MAC) units, a high-speed non-blocking
    switch fabric, a dedicated address lookup engine, and an
    on-chip frame buffer memory. All PHY units support 10BASE-T and 100BASE-TX.
    In addition, two of the PHY units support 100BASE-FX on
    ports 4 and 5 for KSZ8995MA, two of the PHY units
    support 100BASE-FX on ports 3 and 4 for KSZ8995FQ.
    Datasheets and support documentation can be found on
    Micrel’s web site at: www.micrel.com. Functional Diagram Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 http://www.micrel.com December 2012 M9999-121212-3.0 Micrel, Inc. KS8995MA/FQ Features Integrated switch with five MACs and five fast
    Ethernet transceivers fully-compliant to IEEE 802.3u
    standard Shared memory based switch fabric with fully nonblocking configuration 1.4Gbps high-performance memory bandwidth 10BASE-T, 100BASE-TX, and 100BASE-FX modes Dual MII configuration: MII-Switch (MAC or PHY ...
  • Download » Datasheet PDF, 224 Kb, File published: Apr 19, 2016
    KSZ8995X Data Sheet
    Docket ↓
    KS8995X Micrel KS8995X
    Integrated 5-Port 10/100 QoS Switch
    Rev. 1.13 General Description Features The KS8995X is a highly integrated Layer-2 QoS (Quality of
    Service) switch with optimized BOM (Bill of Materials) cost for
    low port count, cost-sensitive 10/100Mbps switch systems. It
    also provides an extensive feature set including three different QoS priority schemes, a dual MII interface for BOM cost
    reduction, rate limiting to offload CPU tasks, software and
    hardware power-down, a MDC/MDIO control interface and
    port mirroring/monitoring to effectively address both current
    and emerging Fast Ethernet applications.
    The KS8995X contains five 10/100 transceivers with patented mixed-signal low-power technology, five MAC (Media
    Access Control) units, a high-speed non-blocking switch
    fabric, a dedicated address lookup engine, and an on-chip
    frame buffer memory.
    All PHY units support 10BaseT and 100BaseTX. In addition,
    two of the PHY units support 100BaseFX (Ports 4 and 5).
    All support documentation can be found on Micrel’s web site
    at www.micrel.com. Integrated switch with five MACs and five Fast Ethernet
    transceivers fully compliant to IEEE 802.3u standard Shared memory based switch fabric with fully nonblocking configuration 10BaseT, 100BaseTX and 100BaseFX modes (FX in
    Ports 4 and 5) Dual MII configuration: MII-Switch (MAC or PHY mode
    MII) and MII-P5 (PHY mode MII) VLAN ID tag/untag options, per-port basis Enable/disable option for huge frame size up to 1916
    bytes per frame Broadcast storm protection with percent control – global
    and per-port basis Optimization for fiber-to-copper media conversion Full-chip hardware power-down support (register ...
  • Download » Datasheet PDF, 361 Kb, File published: Apr 19, 2016
    KSZ8995XA Data Sheet
    Docket ↓
    KS8995XA
    Integrated 5-Port 10/100 QoS Switch
    Rev 2.6 General Description
    The KS8995XA is a highly integrated Layer-2 quality of
    service (QoS) switch with optimized bill of materials
    (BOM) cost for low port count, cost-sensitive
    10/100Mbps switch systems. It also provides an
    extensive feature set including three different QoS
    priority schemes, a dual MII interface for BOM cost
    reduction, rate limiting to offload CPU tasks, software
    and hardware power-down, a MDC/MDIO control
    interface and port mirroring/monitoring to effectively
    address both current and emerging Fast Ethernet
    applications. The KS8995XA contains five 10/100 transceivers with
    patented mixed-signal low-power technology, five media
    access control (MAC) units, a high-speed non-blocking
    switch fabric, a dedicated address lookup engine, and
    an on-chip frame buffer memory.
    All PHY units support 10BASE-T and 100BASE-TX. In
    addition, two of the PHY units support 100BaseFX
    (Ports 4 and 5). Functional Diagram
    10/100
    T/Tx 1 10/100 ...

Prices

Status

Lifecycle StatusNot Recommended for new designs

Packaging

PackagePQFP
Pins128

Parametrics

# Ethernet Ports5
Automotive GradeNo
Cable DiagnosticsYes
EEENo
Ethernet Bandwidth10/100Mbps
Fiber Support100FX (2)
IEEE 1588No
InterfaceMII/RMII
Interrupt PinYes
LEDs15
On-Chip TerminationYes
Op. Voltage3.3 V
Operating Temperature Range-40 to +85 °C
Temp Range Max.(° C)85
Temp Range Min.(° C)-40
Vdd I/O1.8/2.5/3.3 V
WOLNo

Eco Plan

RoHSCompliant

Moldel Line

Series: KSZ8995 (8)

Manufacturer's Classification

  • High-Speed Networking and Video > Ethernet > Ethernet Switches

Related datasheets:

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus