RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Microchip MCP25612FD

ManufacturerMicrochip
SeriesMCP25612FD

The MCP25612FD is a second generation, dual CAN transceiver from Microchip Technology The device supports both Classic CAN and CAN Flexible Data-rate (CAN FD) physical layer requirements allowing designs the ability to serve CAN systems today while preparing for future CAN FD system requirements

Datasheets

  • Download » Datasheet, PDF, 579 Kb, 06-12-2015
    MCP25612FD Data Sheet
    Docket ↓
    MCP25612FD
    Dual CAN Flexible Data-Rate Transceiver
    Features Supports both “classic” CAN 2.0 and CAN FD
    physical layer requirements Optimized for CAN FD (Flexible Data-Rate) at
    2, 5 and 8 Mbps Operation:
    -Maximum Propagation Delay: 120 ns
    -Loop Delay Symmetry: -10%/+10% (2 Mbps) Implements ISO-11898-2 and ISO-11898-5
    Standard Physical Layer Requirements Very Low Standby Current (5 µA per transceiver,
    typical) Two Fully Independent VDDX and VSSX Pins per CAN
    FD Transceiver for Added Flexibility and Reliability:
    -Optimal for redundant CAN networks Compatible to 5V MCUs Functional Behavior Predictable Under All Supply
    Conditions:
    -Device is in Unpowered mode if VDDX drops
    below undervoltage level
    -An unpowered node or brown-out event will
    not load the CAN bus Detection of Ground Fault:
    -Permanent dominant detection on TXDX
    -Permanent dominant detection on bus Power-on Reset and Undervoltage Lock-out on
    VDDX Pin Protection against Damage due to Short-Circuit
    Conditions (positive or negative battery voltage) Protection against High-Voltage Transients in
    Automotive Environments Automatic Thermal Shutdown Protection Suitable for 12V and 24V Systems Meets or exceeds Stringent Automotive Design
    Requirements, including “Hardware Requirements
    for LIN, CAN and FlexRay™ Interfaces in ...

Prices

Status

MCP25612FD-E/SLMCP25612FD-H/SLMCP25612FDT-E/SLMCP25612FDT-H/SL
Lifecycle StatusProduction (Appropriate for new designs but newer alternatives may exist)Production (Appropriate for new designs but newer alternatives may exist)Production (Appropriate for new designs but newer alternatives may exist)Production (Appropriate for new designs but newer alternatives may exist)

Packaging

Parametrics

MCP25612FD-E/SLMCP25612FD-H/SLMCP25612FDT-E/SLMCP25612FDT-H/SL
Operating Temperature Range, °C-40 to +125-40 to >+125-40 to +125-40 to >+125
Operating Voltage, V4.5 - 5.54.5 - 5.54.5 - 5.54.5 - 5.5
Temp. Range, °C-40 - +150-40 - +150-40 - +150-40 - +150

Eco Plan

Moldel Line

Series: MCP25612FD (4)

Manufacturer's Classification

  • Interface and Connectivity > CAN > CAN Transceivers

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus