Datasheet Microchip MCP2021AT-330E/SNTSL

MCP2021/2/1P/2P
LIN Transceiver with Voltage Regulator
Features: Description: The MCP2021/2/1P/2P are Compliant with LIN
Bus Specifications 1.3, 2.1 and are Compliant to
SAE J2602-2 Support Baud Rates up to 20 kBaudпЂ with
LIN-compatible Output Driver 43V Load Dump Protected Very Low EMI Meets Stringent OEM Requirements Wide Supply Voltage, 6.0V-18.0V Continuous:
-Maximum input voltage of 30V Extended Temperature Range: -40 to +125В°C Interface to PICВ® EUSART and Standard USARTs Local Interconnect Network (LIN) Bus Pin:
-Internal pull-up resistor and diode
-Protected against ground shorts
-Protected against loss of ground
-High-current drive Automatic Thermal Shutdown On-Chip Voltage Regulator:
-Output voltage of 5.0V with tolerances of
В±3% overtemperature range
-Available with alternate output voltage of
3.3V with tolerances of В±3% overtemperature
range
-Maximum continuous input voltage of 30V
-Internal thermal overload protection
-Internal short circuit current limit
-External components limited to filter capacitor
and load capacitor Two Low-Power modes:
-Receiver On, Transmitter Off, Voltage
Regulator On (пЃЂ 85 ВµA) …