Datasheet Microchip USB5434-3089JZX-TR

USB5534B
4-Port SS/HS USB Hub Controller
General Description
The USB5534B hub is a 4-port SuperSpeed/Hi-Speed,
low-power, configurable hub controller family fully compliant with the USB 3.0 Specification. The USB5534B
supports 5 Gbps SuperSpeed (SS), 480 Mbps HiSpeed (HS), 12 Mbps Full-Speed (FS) and 1.5 Mbps
Low-Speed (LS) USB signaling for complete coverage
of all defined USB operating speeds.
The USB5534B supports USB 2.0 speeds through its
USB 2.0 hub controller. The new SuperSpeed hub controller operates in parallel with the USB 2.0 controller,
so the 5 Gbps SuperSpeed data transfers are not
affected by the slower USB 2.0 traffic.
The USB5534B supports battery charging on a per port
basis. On battery charging enabled ports, the devices
provide automatic USB data line handshaking. The
handshaking supports USB 1.2 Charging Downstream
Port (CDP), Dedicated Charging Port (DCP) and nonUSB 1.2 devices.
The USB5534B is configured for operation through
internal default settings, where custom configurations
are supported through an on-chip OTP ROM, an external SPI ROM, or SMBus. Product Features USB 3.0 compliant 5 Gbps, 480 Mbps, 12 Mbps
and 1.5 Mbps operation, USB pins are 5 V tolerant
-Integrated termination and pull-up/pull-down
resistors Four downstream USB 3.0 ports Supports battery charging of most popular battery …

USB5434B
4-Port SS/HS USB Hub Controller PRODUCT FEATURES Datasheet General Description Features The SMSC USB5434B hub is a 4-port SuperSpeed/HiSpeed, low-power, configurable hub controller family
fully compliant with the USB 3.0 Specification. The
USB5434B supports 5 Gbps SuperSpeed (SS),
480 Mbps Hi-Speed (HS), 12 Mbps Full-Speed (FS) and
1.5 Mbps Low-Speed (LS) USB signalling for complete
coverage of all defined USB operating speeds.
The USB5434B supports legacy USB speeds through its
USB 2.0 hub controller. The new SuperSpeed hub
controller operates in parallel with the USB 2.0
controller, so the 5 Gbps SuperSpeed data transfers are
not affected by the slower USB 2.0 traffic.
The USB5434B is configured for operation through
internal default settings. В„ USB 3.0 compliant 5 Gbps, 480 Mbps, 12 Mbps and
1.5 Mbps operation, USB pins are 5 V tolerant В„ Four downstream USB 3.0 ports
Optimized for low-power operation and low thermal
dissipation
Single 25 MHz XTAL or clock input for all on-chip PLL
and clocking requirements
Supports JTAG boundary scan
IETF RFC 4122 compliant 128-bit UUID — Integrated termination and pull-up/pull-down resistors „
В„
В„ …