Datasheet Texas Instruments HPA00810ADRVR-2/2
| Manufacturer | Texas Instruments |
| Series | TPS61161A |
| Part Number | HPA00810ADRVR-2/2 |
White LED Driver with PWM Brightness Control in 2mm x 2mm WSON Package. Up to 10 LEDs in Series 6-WSON -40 to 85
Datasheets
TPS6116xA White LED Driver with PWM Brightness Control in 2-mm x 2-mm WSON Package datasheet
PDF, 1.7 Mb, Revision: C, File published: Jul 14, 2016
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 6 |
| Package Type | DRV |
| Industry STD Term | WSON |
| JEDEC Code | S-PDSO-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | OBT |
| Width (mm) | 2 |
| Length (mm) | 2 |
| Thickness (mm) | .75 |
| Pitch (mm) | .65 |
| Max Height (mm) | .8 |
| Mechanical Data | Download |
Parametrics
| Number of Channels | 1 |
| Duty Cycle(Max) | 93 % |
| LED | 10 |
| LED Current Per Channel | 20 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | WSON |
| Package Size: mm2:W x L | See datasheet (WSON) PKG |
| Peak Efficiency | 90 % |
| Rating | Catalog |
| Shutdown Current(Typ) | 0.7 uA |
| Special Features | EasyScale 1-Wire Interface,Load Disconnect During Shutdown |
| Switching Frequency(Max) | 600 kHz |
| Topology | Boost |
| Type | Inductive |
| Vin(Max) | 18 V |
| Vin(Min) | 2.7 V |
| Vout(Max) | 38 V |
| Vout(Min) | 2.7 V |
Eco Plan
| RoHS | Compliant |
Application Notes
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering. - TPS6116x With Separate Power Stage and IC Input VoltagesPDF, 194 Kb, File published: Apr 2, 2009
This application report shows how to operate the TPS6116x integrated circuits (IC) with two separate input power rails, one for the boost power stage and one to power the IC itself. In this example, an input as low as 1.8 V from discharged dual-alkaline batteries supplies power to the boost stage, whereas a separate 3.3-V supply powers the IC. - Extending the Input Voltage Range of the TPS6116x/8x/9x WLED DriversPDF, 124 Kb, File published: Aug 12, 2009
The TPS6116x, TPS6118x and TPS6119x WLED driver and TPS6117x boost converter integrated circuits (IC) can operate with different input voltages, one powering the IC itself and the other powering the boost power stage. This application report explains various options on how to use the WLED drivers with split power rails. This allows these LED drivers to be used in applications where the available
Model Line
Series: TPS61161A (3)
- HPA00810ADRVR-2/2 TPS61161ADRVR TPS61161ADRVT
Manufacturer's Classification
- Semiconductors > Power Management > LED Driver > Backlight LED Driver
Other Names:
HPA00810ADRVR2/2, HPA00810ADRVR 2/2
