Datasheet Texas Instruments TPS2300IPW

Manufacturer	Texas Instruments
Series	TPS2300
Part Number	TPS2300IPW

3-13V Dual HotSwap IC w/ Independent Channel Circuit Breaking & Power Good Report, Act-Low Enable 20-TSSOP -40 to 85

Datasheets

Download

PDF, 506 Kb, Revision: H, File published: May 10, 2013

Extract from the document

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

Packaging

Pin	20
Package Type	PW
Industry STD Term	TSSOP
JEDEC Code	R-PDSO-G
Package QTY	70
Carrier	TUBE
Device Marking	TPS2300I
Width (mm)	4.4
Length (mm)	6.5
Thickness (mm)	1
Pitch (mm)	.65
Max Height (mm)	1.2
Mechanical Data	Download

Parametrics

Channel(s) Controlled	2
Current Limit Accuracy	Adjustable
Current Limit Function Enabled	Always
Current Limit Threshold(Typ)	Adjustable Ext FET=mV
Current Measurement Accuracy	N/A %
Design Support	Calculation Tool,EVM
Fault Response	Latch Off
ON_OFF Control Input	EN/ s
Operating Temperature Range	-40 to 85 C
Package Group	TSSOP
Package Size: mm2:W x L	20TSSOP: 42 mm2: 6.4 x 6.5(TSSOP) PKG
Rating	Catalog
Status Output	FLT/,PG
Vabsmax_cont	15 V
Vin(Max)	13 V
Vin(Min)	3 V

Eco Plan

RoHS

Compliant

Design Kits & Evaluation Modules

Evaluation Modules & Boards: TPS2301EVM-153
TPS23XX Hot Swap Power Controllers Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: TPS2330EVM-184
TPS2330 48-V Telecom Hot Swap Evaluation Module and Interface Card
Lifecycle Status: Active (Recommended for new designs)
- Download

Application Notes

Download
VREG Considerations in a 5V and 3.3V System Using the TPS2300/01/10/11
PDF, 537 Kb, File published: Mar 31, 2006
This application report illustrates the use of the TPS2300/2301/2310/2311 for a common dual 5-V/3.3-V application. The TPS2300/2301/2310/2311 are dual-channel, hot-swap controllers that eliminate high-frequency, hot-plug or hot-removal transients, reduce inrush current, and provide overcurrent protection. The TPS2300 family can be easily configured for 5-V/3.3-V application providing a unified inp
Download
Low Voltage (0V-5.5V) Hot-Swap Application Using TPS2300/2301
PDF, 141 Kb, File published: Nov 1, 2001
This application note illustrates the use of the TPS2300/2301 for low voltage applications. The TPS2300/2301/2310/2311/2320/2321 are dual-channel hot-swap controllers that eliminate high-frequency hot-plug or hot-removal transients, reduce inrush current, and provide overcurrent protection. The TPS2300/2301/2310/2311/2320/2321 can be easily configured for low voltage applications and are capable o
Download
Step-By-Step Design Approach of TPS2300/01/10/11/20/21/30/31 Hotswap Controllers
PDF, 169 Kb, File published: May 23, 2003
The TPS2300/01/10/11/20/21/30/31 hotswap controllers allow safe board insertion and removal from a live backplane. With the current-limit-setting resistor (RSET), the current limit can be set much more easily than other hotswap controllers. This report uses a simple step-by-step design approach to select the essential components and parameters for typical hotswap applications. By following the des
Download
Power Management Solutions for Infiniband (SM) I/O Modules
PDF, 75 Kb, File published: Oct 20, 2000
InfiniBand, a scalable, modular, channel-based, switched-fabric architecture, is defined for the connection of servers with servers and with storage and networking devices. Because appropriate power management is essential for quality implementations, this report presents straightforward solutions for both high-power and low-power applications as required by the InfiniBand specification.

Model Line

Series: TPS2300 (4)

TPS2300IPW TPS2300IPWG4 TPS2300IPWR TPS2300IPWRG4

Manufacturer's Classification

Semiconductors > Power Management > Protection, Monitoring and Hot Swap > Hot Swap Controllers (Positive, -48V)