Datasheet Texas Instruments TPS65100QPWPRQ1
| Manufacturer | Texas Instruments |
| Series | TPS65100-Q1 |
| Part Number | TPS65100QPWPRQ1 |
Automotive 2.7V to 5.8V LCD Supply with Boost Converter, Dual Charge Pump, and LDO Controller 24-HTSSOP -40 to 125
Datasheets
TPS65100-Q1 Triple-Output LCD Supply With Linear Regulator and VCOM Buffer datasheet
PDF, 1.8 Mb, Revision: C, File published: Jul 27, 2017
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 24 |
| Package Type | PWP |
| Industry STD Term | HTSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | 65100Q |
| Width (mm) | 4.4 |
| Length (mm) | 7.8 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Download |
Parametrics
| DisplayType | Automotive,LCD Unipolar |
| IC Integration | LCD Bias |
| Level Shifter/Scan Driver | N/A Ch |
| Pin/Package | 24HTSSOP |
| Source Driver Voltage(Max) | 15 V |
| Source Driver Voltage(Min) | 5 V |
| Special Function | VCOM/OpAmp |
| Target Application | 7 inches or less,7 to 13 inches |
| Vin(Max) | 5.8 V |
| Vin(Min) | 2.7 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPS65100EVM-030
TPS65100 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Multi-rails supply regulated outputs to power TFT screen from car batteryPDF, 500 Kb, File published: Oct 16, 2012
- Load Disconnect for the TPS6510x (Rev. A)PDF, 69 Kb, Revision: A, File published: Feb 8, 2017
Many boost converters have an external rectifier diode. The input voltage of the TPS6510x main boostconverter is connected to the output voltage when the device is disabled. Due to the direct pass from theinput to the output, the converter has no short-circuit protection. This application report describes how touse a PNP transistor and some passive components to disconnect the boost converte - Basic Calculation of an Inverting Buck-Boost Power Stage (Rev. A)PDF, 431 Kb, Revision: A, File published: Aug 28, 2017
This application note provides basic formulas that you need to design the power stage of an invertingbuck-boost converter. The premise is that the power switch is integrated in the IC and the rectification isdone by a diode (non-synchronous power stage). It provides all the formulas and considerations that youneed to select the external power components such as the inductor the diode and t - Understanding Undervoltage Lockout in Power Devices (Rev. A)PDF, 90 Kb, Revision: A, File published: Sep 19, 2018
Many integrated circuits include an undervoltage lockout (UVLO) function to disable the device at low supply voltages. Below the minimum supply voltage the function and performance of a device may be undefined making it impossible to predict system behavior. This application note explains how to correctly understand the undervoltage lockout specification in the data sheets of TI's power products. - Basic Calculation of a Boost Converter's Power Stage (Rev. C)PDF, 186 Kb, Revision: C, File published: Jan 8, 2014
This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
Model Line
Series: TPS65100-Q1 (1)
- TPS65100QPWPRQ1
Manufacturer's Classification
- Semiconductors > Power Management > LCD/OLED Display Bias Solutions
