HMC361G8
v00.1111 Frequency Dividers & Detectors -SMT SMT GaAs HBT MMIC
DIVIDE-BY-2, 0.01 -13 GHz
Typical Applications Features Prescaler for 10 MHz to 13 GHz PLL Applications: Ultra Low SSB Phase Noise: -148 dBc/Hz • Point-to-Point / Multi-Point Radios Wide Bandwidth • VSAT Radios Output Power: 3 dBm • Fiber Optic Single DC Supply: +5V • Test Equipment 8 Lead Hermetic SMT Package • Space & Military Functional Diagram General Description
The HMC361G8 is a low noise N = 2 static divider in
an 8 lead glass/metal surface mount (hermetic) package. This device operates from 10 MHz (with a square
wave input) to 13 GHz input frequency with a single
+5V DC supply. The low additive SSB phase noise of
-148 dBc/Hz at 100 kHz offset helps the user maintain
good system noise performance. Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Conditions Min. Maximum Input Frequency Parameter Sine Wave or Square Wave input 13 Minimum Input Frequency Sine Wave or Square Wave Input. {1} Minimum Input Frequency Input Power Range Output Power Reverse Leakage
SSB Phase Noise (100 kHz offset)
Output Transition Time Typ. Max. Units 0.20 GHz GHz 0.01 GHz Fin = 0.01 to 0.20 GHz (square wave) Square Wave {1} {2}
-10 10 dBm Fin = 0.20 to 0.5 GHz (sine) 0 10 dBm Fin = 0.5 to 1 GHz (sine) -10 10 dBm Fin = 1 to 8 GHz (sine) -15 10 dBm Fin = 8 to 11 GHz (sine) -15 2 Fin = 8 -13 GHz (sine) -15 0 dBm Fin = 0.20 GHz 4.5 dBm Fin = 6 GHz 3.6 dBm Fin = 9 GHz 1.6 dBm
dBm Fin = 13 GHz -2.5 Both RF Outputs Terminated 40 dB Pin = 0 dBm, Fin = 6 GHz (sine) -148 dBc/Hz Pin = 0 dBm, Fout = 882 MHz 100 ps 84 mA Supply Current (Icc) (Vcc = +5V) 1. Divider will operate down to 0.01 GHz with a square-wave input signal.
2. Square wave input waveform is recommended for operation below 200 MHz. Recommended transitions times are < 100 ps. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price, …
