Datasheet Holtek HT12F


212 Series of Decoders


Datasheet HT12D, HT12F
PDF, 115 Kb, Language: en, File uploaded: Dec 8, 2020, Pages: 12
212 Series of Decoders
Extract from the document


Detailed Description

The 212 decoders are a series of CMOS LSIs for remote control system applications.

They are paired with Holtek's 212 series of encoders (refer to the encoder/decoder cross reference table). For proper operation, a pair of encoder/decoder with the same number of addresses and data format should be chosen.

The decoders receive serial addresses and data from a programmed 212 series of encoders that are transmitted by a carrier using an RF or an IR transmission medium. They compare the serial input data three times continuously with their local addresses. If no error or unmatched codes are found, the input data codes are decoded and then transferred to the output pins. The VT pin also goes high to indicate a valid transmission.

The 212 series of decoders are capable of decoding informations that consist of N bits of address and 12-N bits of data. Of this series, the HT12D is arranged to provide 8 address bits and 4 data bits, and HT12F is used to decode 12 bits of address information.

Other Options


Model Line

Series: HT12F (2)

Manufacturer's Classification

  • Infrared > Encoder / Decoder > 2¹² Encoder/Decoder
PCB Design Analysis Software-NextDFM One-click Design Analysis for Manufacturability Layout Engineer Free Forever