Datasheet LM6132AIM/NOPB - National Semiconductor IC, OP AMP, DUAL, 10 MHz, SMD

National Semiconductor LM6132AIM/NOPB

Part Number: LM6132AIM/NOPB

Detailed Description

Manufacturer: National Semiconductor

Description: IC, OP AMP, DUAL, 10 MHz, SMD

data sheetDownload Data Sheet

LM6132 and LM6134 Dual and Quad, Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers
November 2004
LM6132/LM6134 Dual and Quad Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers
General Description
The LM6132/34 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360 µA/amp supply current, the 10 MHz gainbandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating. Operating on supplies from 2.7V to over 24V, the LM6132/34

Simulation ModelSimulation Model


RoHS: Yes