Datasheet LTC3812-5 (Analog Devices) - 3

ManufacturerAnalog Devices
Description60V Current Mode Synchronous Switching Regulator Controller
Pages / Page34 / 3 — The. ELECTRICAL CHARACTERISTICS. denotes specifi cations which apply over …
File Format / SizePDF / 412 Kb
Document LanguageEnglish

The. ELECTRICAL CHARACTERISTICS. denotes specifi cations which apply over the full operating

The ELECTRICAL CHARACTERISTICS denotes specifi cations which apply over the full operating

Model Line for this Datasheet

Text Version of Document

LTC3812-5
The ELECTRICAL CHARACTERISTICS
l
denotes specifi cations which apply over the full operating temperature range, otherwise specifi cations are at TA = 25°C (Note 2), INTVCC = VBOOST = VRNG = VEXTVCC = VNDRV = 5V, VFCB = VSW = 0V, unless otherwise specifi ed. SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS Main Control Loop
INTVCC INTVCC Supply Voltage l 4.35 14 V IQ INTVCC Supply Current RUN/SS > 1.5V (Notes 4, 5) 3 6 mA INTVCC Shutdown Current RUN/SS = 0V 224 600 μA IBOOST BOOST Supply Current RUN/SS > 1.5V (Note 5) 240 400 μA RUN/SS = 0V 0 5 μA VFB Feedback Voltage (Note 4) 0.796 0.800 0.804 V 0°C to 85°C l 0.794 0.800 0.806 V –40°C to 85°C l 0.792 0.800 0.806 V –40°C to 125°C l 0.792 0.800 0.808 V ∆V Feedback Voltage Line Regulation 5V < INTV FB,LINE CC < 14V (Note 4) l 0.002 0.02 %/V VSENSE(MAX) Maximum Current Sense Threshold VRNG = 2V, VFB = 0.76V 256 320 384 mV VRNG = 0V, VFB = 0.76V 70 95 120 mV VRNG = INTVCC, VFB = 0.76V 170 215 260 mV VSENSE(MIN) Minimum Current Sense Threshold VRNG = 2V, VFB = 0.84V –300 mV VRNG = 0V, VFB = 0.84V –85 mV VRNG = INTVCC, VFB = 0.84V –200 mV IVFB Feedback Current VFB = 0.8V 20 150 nA AVOL(EA) Error Amplifi er DC Open-Loop Gain 65 100 dB fU Error Amp Unity Gain Crossover (Note 6) 25 MHz Frequency VFCB FCB Threshold VFCB Rising 0.75 0.8 0.85 V IFCB FCB Current FCB = 5V 0 1 μA VRUN/SS Shutdown Threshold 1.2 1.5 2 V IRUN/SS RUN/SS Source Current RUN/SS = 0V 0.7 1.4 2.5 μA VVCCUV INTVCC Undervoltage Lockout Linear Regulator Mode INTVCC Rising, INDRV = 100μA l 4.05 4.2 4.35 V External Supply Mode INTVCC Rising, NDRV = INTVCC = EXTVCC l 4.05 4.2 4.35 V Trickle-Charge Mode INTVCC Rising, NDRV = INTVCC, EXTVCC = 0 l 8.70 9.0 9.30 V INTVCC Falling 3.7 V
Oscillator
tON On-Time ION = 100μA 1.55 1.85 2.15 μs ION = 300μA 515 605 695 ns tON(MIN) Minimum On-Time ION = 2500μA 100 ns tOFF(MIN) Minimum Off-Time 250 350 ns
Driver
IBG,PEAK BG Driver Peak Source Current VBG = 0V 0.7 1 A RBG,SINK BG Driver Pull-Down RDS(ON) 1 1.5 Ω ITG,PEAK TG Driver Peak Source Current VTG – VSW = 0V 0.7 1 A RTG,SINK TG Driver Pull-Down RDS(ON) 1 1.5 Ω
PGOOD Output
∆V PGOOD Upper Threshold V 7.5 10 12.5 % FBOV FB Rising PGOOD Lower Threshold VFB Falling –7.5 –10 –12.5 % ∆V PGOOD Hysterisis V FB,HYST FB Returning 1.5 3 % VPGOOD PGOOD Low Voltage IPGOOD = 5mA 0.3 0.6 V 38125fc 3
EMS supplier