Development prototype board Olimex LPC-2378STK
LPC-2378STK - development prototype board with LPC2378 Ethernet, USB, 2×CAN, 2xRS232, Ethernet, SD/MMC, audio in-out.
Detailed Description
FEATURES:
- MCU: LPC2378 16/32 bit ARM7TDMI-St with 512K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC, 4×10 bit ADC 2.44 uS, 2×UARTs, 4×CAN, I2C, SPI, 2×32bit TIMERS, 7×CCR, 6×PWM, WDT, 5V tolerant I/O, up to 60MHz operation
- standard JTAG connector with ARM 2×10 pin layout for programming/debugging with ARM-JTAG
- Optional - TRACE connector
- 128×128 pixel 12 bit color TFT LCD with backlight
- Ethernet 100MBit
- MMA7620 3 axis accelerometer
- Two RS232 port
- Two CAN drivers and connector
- SD/MMC card connector
- UEXT connector with I2C, SPI, RS232 and power supply for connecting add-on modules like RF link, MP3, etc available from Olimex
- IrDA transciever on board
- Audio in and Audio Out jacks for microphone and headphones
- trimpot connected to ADC
- RESET circuit with external control of Philips ISP utility via RS232 port
- Jumpers for ISP/RUN mode
- Joystick with four directions and push action
- two USER button
- RESET Button
- two on board voltage regulators 3V and 5V with up to 800mA current
- Extension port connector for many of microcontrollers pins
- single power supply: External power supply, USB or JTAG connector
- Battery holder and connector for the RTC
- power supply led
- FR-4, 1.5 mm, red soldermask, component print
- Dimensions: 135×101mm (5.3×3.98")
Schematic diagram LPC-P2378STK development board
Other Names:
LPC2378STK, LPC 2378STK