Development board Olimex LPC-E2224
LPC-E2214 - Development board for LPC2214 ARM7TDMI-S microcontroller with 1MB External FLASH, 1MB external SRAM USB, RS232 AND Ethernet.
Detailed Description
FEATURES:
- MCU: LPC2214 16/32 bit ARM7TDMI-S with 256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4×10 bit ADC 2.44 uS, 2×UARTs, I2C, SPI, 2×32bit TIMERS, 7×CCR, 6×PWM, WDT, 5V tolerant I/O, up to 60MHz operation
- standard JTAG connector with ARM 2×10 pin layout for programming/debugging with ARM-JTAG
- optional ETM connector (not installed)
- 1MB (256K×32bit) 12 ns 71V416 SRAM
- 1MB (512K×16bit) 55ns MX26LV800BTC FLASH or 70 ns ES29LV800EB FLASH
- standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
- USB to RS232 convertor, board can take power only from USB port
- RESET circuit with exterman control of Philips ISP utility via USB-RS232 virtual port
- Jumpers for boot select from external memory
- Jumpers for ISP/RUN mode
- Ethernet controller with CS8900A and RJ45 connector
- LCD 16×2 DISPLAY with BACKLIGHT
- 2 BUTTONS
- POTENTIOMETER connected to ADC
- SPI connector
- RS232 driver and connector
- DALLAS i-BUTTON interface and connector
- I2C 24LC515 EEPROM on board
- two on board voltage regulators 1.8V and 3.3V with up to 800mA current
Schematic diagram LPC-E2214 development board
Other Names:
LPCE2214, LPC E2214
