Datasheet Texas Instruments OPA569AIDWPR
| Manufacturer | Texas Instruments |
| Series | OPA569 |
| Part Number | OPA569AIDWPR |
Power Op Amp, Output Signal Swings Within 200mV of Rails at 2A Output Current 20-SO PowerPAD -55 to 125
Datasheets
OPA569: Rail-To-Rail I/O, 2A Power Amplifier datasheet
PDF, 1.1 Mb, Revision: A, File published: Oct 22, 2003
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 20 |
| Package Type | DWP |
| Industry STD Term | HSOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | OPA569A |
| Width (mm) | 7.52 |
| Length (mm) | 12.82 |
| Thickness (mm) | 2.55 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 2.65 |
| Mechanical Data | Download |
Parametrics
| Additional Features | Adj Current Limit,Shutdown |
| Architecture | FET |
| CMRR(Min) | 70 dB |
| CMRR(Typ) | 90 dB |
| GBW(Typ) | 1.2 MHz |
| Input Bias Current(Max) | 10 pA |
| Iq per channel(Max) | 11 mA |
| Iq per channel(Typ) | 9 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 1.3 uV/C |
| Operating Temperature Range | -55 to 125 C |
| Output Current(Typ) | 2400 mA |
| Package Group | SO PowerPAD |
| Package Size: mm2:W x L | 20SO PowerPAD: 133 mm2: 10.405 x 12.825(SO PowerPAD) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 1.2 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vos (Offset Voltage @ 25C)(Max) | 2 mV |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: OPAMPEVM
Universal Operational Amplifier Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Power Amplifier Stress and Power Handling LimitationsPDF, 55 Kb, File published: Sep 27, 2000
To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques.
Model Line
Series: OPA569 (4)
- OPA569AIDWP OPA569AIDWPG4 OPA569AIDWPR OPA569AIDWPRG4
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Power Op Amps
