Datasheet Texas Instruments THS3122CDDA

ManufacturerTexas Instruments
SeriesTHS3122
Part NumberTHS3122CDDA
Datasheet Texas Instruments THS3122CDDA

Dual, High Output Current, 120-MHz Amplifier 8-SO PowerPAD 0 to 70

Datasheets

THS312x Low-Noise, High-Speed, 450-mA Current Feedback Amplifiers datasheet
PDF, 1.6 Mb, Revision: E, File published: May 13, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin8
Package TypeDDA
Industry STD TermHSOIC
JEDEC CodeR-PDSO-G
Package QTY75
CarrierTUBE
Device Marking3122C
Width (mm)3.9
Length (mm)4.89
Thickness (mm)1.48
Pitch (mm)1.27
Max Height (mm)1.7
Mechanical DataDownload

Parametrics

2nd Harmonic80 dBc
3rd Harmonic77 dBc
@ MHz1
Acl, min spec gain1 V/V
Additional FeaturesN/A
ArchitectureBipolar,Current FB
BW @ Acl138 MHz
CMRR(Min)63 dB
CMRR(Typ)67 dB
GBW(Typ)138 MHz
Input Bias Current(Max)2000000 pA
Iq per channel(Max)9 mA
Iq per channel(Typ)7.2 mA
Number of Channels2
Offset Drift(Typ)10 uV/C
Operating Temperature Range-40 to 85,0 to 70 C
Output Current(Typ)440 mA
Package GroupSO PowerPAD
Package Size: mm2:W x L8SO PowerPAD: 29 mm2: 6 x 4.9(SO PowerPAD) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)1550 V/us
Total Supply Voltage(Max)30 +5V=5, +/-5V=10
Total Supply Voltage(Min)10 +5V=5, +/-5V=10
Vn at 1kHz(Typ)2.2 nV/rtHz
Vn at Flatband(Typ)2.2 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)10 mV

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: THS3122EVM
    THS3122EVM Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: THS3112EVM
    THS3112EVM Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Model Line

Manufacturer's Classification

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
EMS supplier