Datasheet Texas Instruments TS3DV642A0RUAR
| Manufacturer | Texas Instruments |
| Series | TS3DV642 |
| Part Number | TS3DV642A0RUAR |
Multi-Channel Differential Switch/Multiplexer Targeting DVI/HDMI & DisplayPort Applications 42-WQFN
Datasheets
TS3DV642 12-Channel 1:2 MUX/DEMUX with 1.8 V Compatible Control and Power-Down Mode datasheet
PDF, 1.7 Mb, Revision: E, File published: Jun 21, 2017
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 42 |
| Package Type | RUA |
| Industry STD Term | WQFN |
| JEDEC Code | R-PQFP-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | SD642A0 |
| Width (mm) | 3.5 |
| Length (mm) | 9 |
| Thickness (mm) | .75 |
| Pitch (mm) | .5 |
| Max Height (mm) | .8 |
| Mechanical Data | Download |
Parametrics
| Additional Features | Powered off protection |
| Bandwidth | 7500 MHz |
| Bandwidth(Max) | 7500 MHz |
| Configuration | 2:1 SPDT |
| Crosstalk | -98 dB |
| ESD Charged Device Model | 1 kV |
| ESD HBM(Typ) | 2 kV |
| ICC(Typ) | 50 uA |
| Input/Ouput Voltage(Max) | 5.5 V |
| Input/Output Continuous Current(Max) | 128 mA |
| Input/Output OFF-state Capacitance(Typ) | 0.5 pF |
| Input/Output ON-state Capacitance(Typ) | 0.3 pF |
| Number of Channels | 12 |
| OFF-state leakage current(Max) | 10 µA |
| Off Isolation(Typ) | -40 dB |
| Package Group | WQFN |
| Package Size: mm2:W x L | 42WQFN: 32 mm2: 3.5 x 9(WQFN) PKG |
| Propagation Delay | 0.03 ns |
| Protocols | HDMI,DVI,DisplayPort,TMDS,LVDS,VGA |
| RON Flatness(Typ) | 1.5 Ohms |
| Ron Channel Match(Max) | 1 Ω |
| Ron(Max) | 10.5 Ohms |
| Ron(Typ) | 6.5 Ohms |
| VCC(Max) | 4.5 V |
| VCC(Min) | 2.6 V |
| VIH(Min) | 1.4 V |
| VIL(Max) | 0.5 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TS3DV642EVM
12-Channel 1:2 MUX/DEMUX with1.8V Compatible Control and Power-Down Mode Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Preventing Excess Power Consumption on Analog SwitchesPDF, 238 Kb, File published: Jul 3, 2008
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica
Model Line
Series: TS3DV642 (1)
- TS3DV642A0RUAR
Manufacturer's Classification
- Semiconductors > Switches and Multiplexers > Protocol Specific Switches/Muxes
