Datasheet Texas Instruments LMH6622MA/NOPB

ManufacturerTexas Instruments
SeriesLMH6622
Part NumberLMH6622MA/NOPB
Datasheet Texas Instruments LMH6622MA/NOPB

Dual Wideband, Low Noise, 160MHz, Operational Amplifiers 8-SOIC -40 to 85

Datasheets

LMH6622 Dual Wideband, Low Noise, 160 MHz, Operational Amplifiers datasheet
PDF, 1.5 Mb, Revision: E, File published: Jul 25, 2014
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin88
Package TypeDD
Industry STD TermSOICSOIC
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY9595
CarrierTUBETUBE
Device Marking22MALMH66
Width (mm)3.913.91
Length (mm)4.94.9
Thickness (mm)1.581.58
Pitch (mm)1.271.27
Max Height (mm)1.751.75
Mechanical DataDownloadDownload

Parametrics

2nd Harmonic90 dBc
3rd Harmonic100 dBc
@ MHz1
Acl, min spec gain2 V/V
Additional FeaturesDecompensated
ArchitectureBipolar,Voltage FB
BW @ Acl160 MHz
CMRR(Min)80 dB
CMRR(Typ)100 dB
GBW(Typ)320 MHz
Input Bias Current(Max)10000000 pA
Iq per channel(Max)6 mA
Iq per channel(Typ)4.3 mA
Number of Channels2
Offset Drift(Typ)2.5 uV/C
Operating Temperature Range-40 to 85 C
Output Current(Typ)90 mA
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)80 V/us
Total Supply Voltage(Max)12 +5V=5, +/-5V=10
Total Supply Voltage(Min)5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)1.6 nV/rtHz
Vn at Flatband(Typ)1.6 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)1.2 mV

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: LMH730123
    Evaluation Board for High-Speed Dual Op Amp in the 8-Pin MSOP Package
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: LMH730036
    Evaluation Board for High-Speed Dual Op Amp in the 8-Pin SOIC Package
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)
    PDF, 153 Kb, Revision: A, File published: May 16, 2017
    This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi

Model Line

Manufacturer's Classification

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
EMS supplier