Datasheet Texas Instruments TS3USB30RSWR
| Manufacturer | Texas Instruments |
| Series | TS3USB30 |
| Part Number | TS3USB30RSWR |
High-Speed USB 2.0 (480 Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable 10-UQFN -40 to 85
Datasheets
High-Speed USB 2.0 1:2 Multiplexer/Demultiplexer Switch With Single Enable* datasheet
PDF, 1.2 Mb, Revision: F, File published: Aug 14, 2015
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 10 | 10 |
| Package Type | RSW | RSW |
| Industry STD Term | UQFN | UQFN |
| JEDEC Code | R-PQFP-N | R-PQFP-N |
| Package QTY | 3000 | 3000 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | L67 | L6O |
| Width (mm) | 1.4 | 1.4 |
| Length (mm) | 1.8 | 1.8 |
| Thickness (mm) | .45 | .45 |
| Pitch (mm) | .4 | .4 |
| Max Height (mm) | .55 | .55 |
| Mechanical Data | Download | Download |
Parametrics
| Additional Features | Logic Controlled (Output Enabled) |
| Bandwidth | 955 MHz |
| Configuration | 2:1 SPDT |
| Crosstalk(Typ) | -56 dB |
| ESD Charged Device Model(Typ) | 1 kV |
| ESD HBM(Typ) | 6 kV |
| ICC(Max) | 1 uA |
| Input/Ouput Voltage(Max) | 4.3 V |
| Input/Output OFF-state Capacitance(Typ) | 2 pF |
| Input/Output ON-state Capacitance(Typ) | 7 pF |
| Number of Channels | 2 |
| OFF-state leakage current(Max) | 2 µA |
| Off Isolation(Typ) | -39 dB |
| Operating Temperature Range | -40 to 85 C |
| Package Group | UQFN |
| Package Size: mm2:W x L | 10UQFN: 3 mm2: 1.4 x 1.8(UQFN) PKG |
| Propagation Delay(Typ) | 0.25 ns |
| Protocols | USB/MHL |
| Ron Channel Match(Max) | 0.35 Ω |
| Ron(Max) | 10 Ohms |
| Ron(Typ) | 6 Ohms |
| Turn off Time (Disable)(Max) | 25 ns |
| Turn on Time (Enable)(Max) | 30 ns |
| VCC(Max) | 4.3 V |
| VCC(Min) | 3 V |
Eco Plan
| RoHS | Compliant |
Application Notes
- Preventing Excess Power Consumption on Analog SwitchesPDF, 238 Kb, File published: Jul 3, 2008
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica - High-Speed Interface Layout Guidelines (Rev. G)PDF, 814 Kb, Revision: G, File published: Jul 27, 2017
As modern bus interface frequencies scale higher, care must be taken in the printed circuit board (PCB) layout phase of a design to ensure a robust solution.
Model Line
Series: TS3USB30 (1)
- TS3USB30RSWR
Manufacturer's Classification
- Semiconductors > Switches and Multiplexers > Protocol Specific Switches/Muxes
