Datasheet Texas Instruments THS6012IDWPR

500-mA Dual Differential Line Driver 20-SO PowerPAD -40 to 85

Datasheets

PDF, 1.1 Mb, Revision: F, File published: Jun 28, 2012

Extract from the document

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

2nd Harmonic	80 dBc
3rd Harmonic	85 dBc
@ MHz	1
Acl, min spec gain	1 V/V
Additional Features	N/A
Architecture	Current FB
BW @ Acl	140 MHz
CMRR(Min)	62 dB
CMRR(Typ)	70 dB
GBW(Typ)	140 MHz
Input Bias Current(Max)	10000000 pA
Iq per channel(Max)	13 mA
Iq per channel(Typ)	11.5 mA
Number of Channels	2
Offset Drift(Typ)	20 uV/C
Operating Temperature Range	-40 to 85,0 to 70 C
Output Current(Typ)	500 mA
Package Group	SO PowerPAD
Package Size: mm2:W x L	20SO PowerPAD: 133 mm2: 10.405 x 12.825(SO PowerPAD) PKG
Rail-to-Rail	No
Rating	Catalog
Slew Rate(Typ)	1300 V/us
Total Supply Voltage(Max)	33 +5V=5, +/-5V=10
Total Supply Voltage(Min)	9 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	1.8 nV/rtHz
Vn at Flatband(Typ)	1.7 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	5 mV

RoHS

Compliant

Evaluation Modules & Boards: THS6012EVM
THS6012 High Speed Amplifier Evaluation Modules
Lifecycle Status: Active (Recommended for new designs)
- Download

Download
Active Output Impedance for ADSL Line Drivers
PDF, 636 Kb, File published: Nov 26, 2002
Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the
Download
Noise Analysis for High Speed Op Amps (Rev. A)
PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Series: THS6012 (6)

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)