Datasheet Texas Instruments LMH6611
| Manufacturer | Texas Instruments |
| Series | LMH6611 |
Single Supply 345 MHz Rail-to-Rail Output Amplifier
Datasheets
LMH6611/LMH6612 Single Supply 345 MHz Rail-to-Rail Output Amplifiers datasheet
PDF, 2.6 Mb, Revision: K, File published: Oct 9, 2013
Extract from the document
Status
| LMH6611MK/NOPB | LMH6611MKE/NOPB | LMH6611MKX/NOPB | |
|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | Yes | No |
Packaging
| LMH6611MK/NOPB | LMH6611MKE/NOPB | LMH6611MKX/NOPB | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 6 | 6 | 6 |
| Package Type | DDC | DDC | DDC |
| Industry STD Term | SOT-23-THIN | SOT-23-THIN | SOT-23-THIN |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 1000 | 250 | 3000 |
| Carrier | LARGE T&R | SMALL T&R | LARGE T&R |
| Device Marking | AX4A | AX4A | AX4A |
| Width (mm) | 1.6 | 1.6 | 1.6 |
| Length (mm) | 2.9 | 2.9 | 2.9 |
| Thickness (mm) | .87 | .87 | .87 |
| Pitch (mm) | .95 | .95 | .95 |
| Max Height (mm) | 1.1 | 1.1 | 1.1 |
| Mechanical Data | Download | Download | Download |
Parametrics
| Parameters / Models | LMH6611MK/NOPB | LMH6611MKE/NOPB | LMH6611MKX/NOPB |
|---|---|---|---|
| 2nd Harmonic, dBc | 82 | 82 | 82 |
| 3rd Harmonic, dBc | 80 | 80 | 80 |
| @ MHz | 5 | 5 | 5 |
| Acl, min spec gain, V/V | 1 | 1 | 1 |
| Additional Features | Shutdown | Shutdown | Shutdown |
| Architecture | Bipolar,Voltage FB | Bipolar,Voltage FB | Bipolar,Voltage FB |
| BW @ Acl, MHz | 365 | 365 | 365 |
| CMRR(Min), dB | 79 | 79 | 79 |
| CMRR(Typ), dB | 98 | 98 | 98 |
| GBW(Typ), MHz | 365 | 365 | 365 |
| Input Bias Current(Max), pA | 10100000 | 10100000 | 10100000 |
| Iq per channel(Max), mA | 3.8 | 3.8 | 3.8 |
| Iq per channel(Typ), mA | 3.3 | 3.3 | 3.3 |
| Number of Channels | 1 | 1 | 1 |
| Offset Drift(Typ), uV/C | 4 | 4 | 4 |
| Operating Temperature Range, C | -40 to 125 | -40 to 125 | -40 to 125 |
| Output Current(Typ), mA | 120 | 120 | 120 |
| Package Group | SOT-23-THIN | SOT-23-THIN | SOT-23-THIN |
| Package Size: mm2:W x L, PKG | 6SOT-23-THIN: 8 mm2: 2.8 x 2.9(SOT-23-THIN) | 6SOT-23-THIN: 8 mm2: 2.8 x 2.9(SOT-23-THIN) | 6SOT-23-THIN: 8 mm2: 2.8 x 2.9(SOT-23-THIN) |
| Rail-to-Rail | In to V-,Out | In to V-,Out | In to V-,Out |
| Rating | Catalog | Catalog | Catalog |
| Slew Rate(Typ), V/us | 460 | 460 | 460 |
| Total Supply Voltage(Max), +5V=5, +/-5V=10 | 11 | 11 | 11 |
| Total Supply Voltage(Min), +5V=5, +/-5V=10 | 2.7 | 2.7 | 2.7 |
| Vn at 1kHz(Typ), nV/rtHz | 10 | 10 | 10 |
| Vn at Flatband(Typ), nV/rtHz | 10 | 10 | 10 |
| Vos (Offset Voltage @ 25C)(Max), mV | 1.5 | 1.5 | 1.5 |
Eco Plan
| LMH6611MK/NOPB | LMH6611MKE/NOPB | LMH6611MKX/NOPB | |
|---|---|---|---|
| RoHS | Compliant | Compliant | Compliant |
Application Notes
- AN-1803 Design Considerations for a Transimpedance Amplifier (Rev. A)PDF, 103 Kb, Revision: A, File published: May 1, 2013
It is challenging to design a good current-to-voltage (transimpedance) converter using a voltage-feedbackamplifier (VFA). By definition, a photodiode produces either a current or voltage output from exposure tolight. The transimpedance amplifier (TIA) is utilized to convert this low-level current to a usable voltagesignal and the TIA often needs to be compensated for proper operation. This a
Model Line
Series: LMH6611 (3)
Manufacturer's Classification
- Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)