RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Linear Technology LTC3814IFE-5#TRPBF

ManufacturerLinear Technology
SeriesLTC3814-5
Part NumberLTC3814IFE-5#TRPBF

60V Current Mode Synchronous Step-Up Controller

Datasheets

  • Download » Datasheet PDF, 366 Kb, Revision: C, File uploaded: Sep 23, 2017
    LTC3814-5 - 60V Current Mode Synchronous Step-Up Controller
    Docket ↓
    LTC3814-5
    60V Current Mode
    Synchronous Step-Up Controller
    FEATURES DESCRIPTION
    The LTC3814-5 is a synchronous step-up switching regulator controller that can generate output voltages up to
    60V. The LTC3814-5 uses a constant off-time peak current
    control architecture to deliver very high duty cycles with
    accurate cycle-by-cycle current limit without requiring a
    sense resistor. High Output Voltages: Up to 60V
    Large 1О© Gate Drivers
    No Current Sense Resistor Required
    Dual N-Channel MOSFET Synchronous Drive
    В±0.5% 0.8V Voltage Reference
    Fast Transient Response
    Programmable Soft-Start
    Generates 5.5V Driver Supply
    Power Good Output Voltage Monitor
    Adjustable Off-Time/Frequency: tOFF(MIN) < 100ns
    Adjustable Cycle-by-Cycle Current Limit
    Undervoltage Lockout On Driver Supply
    Output Overvoltage Protection
    Thermally Enhanced 16-Pin TSSOP Package A precise internal reference provides В±0.5% DC accuracy.
    A high bandwidth (25MHz) error amplifier provides very ...

Prices

Packaging

PackageTSSOP-16
Package CodeFE
Package Index05-08-1663 (BC)

Parametrics

ArchitectureConstant Off-Time Peak Current Mode
Demo BoardsDC1170A
Design ToolsLTspice Model
Export Controlno
FeaturesNo Rsense, Resistor Set Frequency, External Synchronization, Power Good
Frequency1000 kHz
Frequency Adjust Range100kHz - 1MHz
Frequency Sync Range100kHz - 1MHz
Integrated Inductorno
Ishutdown224 µA
Isupply3 mA
Max Phases1
Monolithicno
Number of Outputs1
Operating Temperature Range-40 to 85 °C
Polyphaseno
Sense ResistorRsense
Switch Current25 A
Synchronousyes
TopologyBoost
Vin Max55 V
Vin Min4.5 V
Vin Min Startup4.5 V
Vout Max60 V
Vout Maximum60V
Vout Min4.5 V
Vswitch Max60 V

Eco Plan

RoHSCompliant

Articles

  • Download » Articles - LT Journal PDF, 489 Kb, File published: Jan 14, 2008
    Synchronous Boost Converters Provide High Voltage without the Heat
    Docket ↓
    DESIGN FEATURES L Synchronous Boost Converters Provide
    High Voltage without the Heat
    by Greg Dittmer Introduction
    The LTC3813 and LTC3814-5 reduce
    the size of high voltage, high power
    boost converters by incorporating
    heat-saving features that eliminate
    the need for large components and
    heat sinks. In particular, two features
    significantly reduce heat losses over
    other high power boost solutions:
    q Synchronous control eliminates
    the high power loss in the diode
    at high output currents
    q Strong internal gate drivers
    reduce switching losses at high
    output voltages.
    The LTC3813 can regulate output voltages up to 100V, while the LTC3814-5 is suitable for applications
    up to 60V. They both use a constant
    off-time peak current mode control
    architecture. Current mode control
    provides tight cycle-by-cycle monitoring of inductor current and constant
    off-time allows high conversion ratios ...

Moldel Line

Series: LTC3814-5 (4)

Manufacturer's Classification

  • Power Management > Switching Regulator > Step-Up (Boost) Regulators > External Power Switch Boost

Other Names:

LTC3814IFE-5TRPBF, LTC3814IFE-5 TRPBF, LTC3814IFE5#TRPBF, LTC3814IFE 5#TRPBF

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus