Electronics ru
Advanced Search +

Datasheet Intersil HS-26C31RH-T

Datasheet Intersil HS-26C31RH-T


Quad, 5.0V Differential Line Driver, CMOS Enable Class T Datasheet


  • Download » Datasheet PDF, 325 Kb, Revision: 2017-11-08
    HS-26C31RH-T Datasheet
    Docket ↓
    HS-26C31RH-T FN4591
    Rev 2.00
    August 1, 2008 Radiation Hardened Quad Differential Line Driver
    Intersil’s Satellite Applications Flow™ (SAF) devices are fully
    tested and guaranteed to 100kRAD total dose. These QML
    Class T devices are processed to a standard flow intended
    to meet the cost and shorter lead-time needs of large volume
    satellite manufacturers, while maintaining a high level of
    reliability. Features The Intersil HS-26C31RH-T is a Quad Differential Line
    Driver designed for digital data transmission over balanced
    lines and meets the requirements of EIA Standard RS-422.
    Radiation Hardened CMOS processing assures low power
    consumption, high speed, and reliable operation in the most
    severe radiation environments. EIA RS-422 Compatible Outputs (Except for IOS) The HS-26C31RH-T accepts CMOS inputs and converts
    them to RS-422 compatible outputs. This circuit uses special
    outputs that enable the drivers to power-down without
    loading down the bus. Enable and disable pins allow several
    devices to be connected to the same data source and
    addressed independently. Single 5V Supply Specifications Line Transmitter for MIL-STD-1553 Serial Data Bus QML Class T, Per MIL-PRF-38535 Radiation Performance
    -Gamma Dose 1 x 105 RAD(Si)
    -SEU and SEL Immune to 100MeV/mg/cm2 CMOS Compatible Inputs High Impedance Outputs when Disabled or Powered
    Down Low Power Dissipation 2.75mW Standby (Max) Low Output Impedance 10пЃ— or Less Full -55В°C to +125В°C Military Temperature Range Applications Specifications for Rad Hard QML devices are controlled by ...




DLA SMD5962-966635962-96663
DescriptionQuad, 5.0V Differential Line Driver, CMOS Enable Class T DatasheetQuad, 5.0V Differential Line Driver, CMOS Enable Class T Datasheet
High Dose Rate (HDR) krad(Si)100100
Operating Temperature Range-55 to 125-55 to 125
Qualification LevelQML Class T (space lower level)QML Class T (space lower level)

Eco Plan


Moldel Line

Series: HS-26C31RH-T (2)

Manufacturer's Classification

  • Space & Harsh Environment > Rad Hard Analog > RH Interface

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus