RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Intersil HS9-26C32RH-T

ManufacturerIntersil
SeriesHS-26C32RH-T
Part NumberHS9-26C32RH-T

Quad Differential Line Receiver

Datasheets

  • Download » Datasheet, PDF, 238 Kb, Revision: 2017-11-08
    HS-26C32RH-T Datasheet
    Docket ↓
    DATASHEET
    HS-26C32RH-T FN4592
    Rev 2.00
    August 1, 2008 Radiation Hardened Quad Differential Line Receiver
    Intersil’s Satellite Applications Flow™ (SAF) devices are fully
    tested and guaranteed to 100kRAD total dose. These QML
    Class T devices are processed to a standard flow intended
    to meet the cost and shorter lead-time needs of large volume
    satellite manufacturers, while maintaining a high level of
    reliability. Features The Intersil HS-26C32RH-T is a Quad Differential Line
    Receiver designed for digital data transmission over
    balanced lines and meets the requirements of EIA Standard
    RS-422. Radiation Hardened CMOS processing assures low
    power consumption, high speed, and reliable operation in
    the most severe radiation environments. EIA RS-422 Compatible Inputs The HS-26C32RH-T has an input sensitivity of 200mV (typ).
    over the common mode input voltage range of 7V. The
    receivers are also equipped with input fail safe circuitry,
    which causes the outputs to go to a logic “1” when the inputs
    are open. Enable and Disable functions are common to all
    four receivers. QML Class T, Per MIL-PRF-38535 Radiation Performance
    -Gamma Dose 1 x 105 RAD(Si)
    -SEU and SEL Immune to 100MeV/mg/cm2 CMOS Compatible Enable Inputs Input Fail Safe Circuitry High Impedance Inputs when Disabled or Powered Down Low Power Dissipation 138mW Standby (Max) Single 5V Supply Full -55°C to +125°C Military Temperature Range Applications Line Receiver for MIL-STD-1553 Serial Data Bus Specifications Functional Diagram Specifications for Rad Hard QML devices are controlled by
    the Defense Supply Center in Columbus (DSCC). The SMD ...
  • Download » Datasheet, PDF, 256 Kb, Revision: 2017-11-08
    HS-26C32RH, HS-26C32EH Datasheet
    Docket ↓
    DATASHEET
    HS-26C32RH, HS-26C32EH FN3402
    Rev 5.00
    May 28, 2013 Radiation Hardened Quad Differential Line Receiver
    The Intersil HS-26C32RH, HS-26C32EH are differential line
    receivers designed for digital data transmission over balanced
    lines and meets the requirements of EIA Standard RS-422.
    Radiation hardened CMOS processing assures low power
    consumption, high speed, and reliable operation in the most
    severe radiation environments.
    The HS-26C32RH, HS-26C32EH have an input sensitivity
    typically of 200mV over the common mode input voltage
    range of 7V. The receivers are also equipped with input fail
    safe circuitry, which causes the outputs to go to a logic “1”
    when the inputs are open. Enable and Disable functions are
    common to all four receivers.
    Specifications for Rad Hard QML devices are controlled by the
    Defense Logistics Agency Land and Maritime (DLA). The SMD
    numbers listed in the “Ordering Information” table must be
    used when ordering.
    Detailed Electrical Specifications for these devices are
    contained in SMD 5962-95689. A “hot-link” is provided on our
    homepage for downloading Features Electrically screened to SMD #5962-95689 QML qualified per MIL-PRF-38535 requirements 1.2 micron radiation hardened CMOS ...

Prices

Packaging

Package16 Ld CFP
Package IndexK16.A

Parametrics

DLA SMD5962-95689
DescriptionQuad Differential Line Receiver
High Dose Rate (HDR) krad(Si)100
Operating Temperature Range-55 to 125
Qualification LevelQML Class T (space lower level)

Eco Plan

RoHSCompliant

Other Options

HS-26C32EH HS-26C32RH

Moldel Line

Series: HS-26C32RH-T (2)

Manufacturer's Classification

  • Space & Harsh Environment > Rad Hard Analog > RH Interface

Other Names:

HS926C32RHT, HS9 26C32RH T

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus