Datasheet Texas Instruments TPS2023P

Manufacturer	Texas Instruments
Series	TPS2023
Part Number	TPS2023P

1.65A, 2.7-5.5V Single Power Distribution Switch IC Hi-Side MOSFET, Fault Report, Act-Low Enable 8-PDIP -40 to 85

Datasheets

Download

PDF, 810 Kb, Revision: C, File published: Sep 24, 2007

Extract from the document

Prices

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Packaging

Pin	8
Package Type	P
Industry STD Term	PDIP
JEDEC Code	R-PDIP-T
Package QTY	50
Carrier	TUBE
Device Marking	TPS2023P
Width (mm)	6.35
Length (mm)	9.81
Thickness (mm)	3.9
Pitch (mm)	2.54
Max Height (mm)	5.08
Mechanical Data	Download

Parametrics

Continuous Current(Max)	1.5 A
Current Limit Topology	Constant-Current
Enable	Active Low
Number of Switches	1
Operating Temperature Range	-40 to 85 C
Package Group	PDIP
Package Size: mm2:W x L	See datasheet (PDIP) PKG
Rating	Catalog
USB Switch rDS(on)	33 mOhms
Vin(Max)	5.5 V
Vin(Min)	2.7 V

Eco Plan

RoHS	Compliant
Pb Free	Yes

Application Notes

Download
Protecting Industrial Digital Control Outputs Using Intelligent MOSFETS
PDF, 55 Kb, File published: Oct 26, 2000
Digital outputs in industrial applications often must implement some type of protection measure. The integrity of the signal, transmitted over a distance of several meters, can suffer due to fault conditions like a short circuit or an overcurrent, either of which can damage the device driving the signal. To prevent electromagnetic compatibility problems, it may also be necessary to slow down the s
Download
TPS202x/3x And TPS204x/5x USB Power Distribution
PDF, 116 Kb, File published: Oct 16, 1998
The USB specification, revision 1.1, defines the power distribution requirements for the self-powered hubs (including hosts), bus-powered hubs, and functions. This application report demonstrates how Texas Instruments power management products meet or exceed voltage regulation, voltage droop, and EMI requirements in the USB power distribution system.
Download
Power Management Solutions for Infiniband (SM) I/O Modules
PDF, 75 Kb, File published: Oct 20, 2000
InfiniBand, a scalable, modular, channel-based, switched-fabric architecture, is defined for the connection of servers with servers and with storage and networking devices. Because appropriate power management is essential for quality implementations, this report presents straightforward solutions for both high-power and low-power applications as required by the InfiniBand specification.
Download
Power Supply Sequencing Solutions for Dual Supply Voltage DSPs (Rev. A)
PDF, 104 Kb, Revision: A, File published: Jul 5, 2000
This application report describes power-supply sequencing recommendations and techniques applicable to dual supply voltage DSPs in TI's TMS320C2000 TMS320C5000 and TMS320C6000 families. These techniques take advantage of the reset power good enable and soft-start features available on TI Power Management Products including low drop out regulators switching power supply controllers supply vol
Download
A Power-Distribution Switch With Latched Over-Current Protection (Rev. A)
PDF, 99 Kb, Revision: A, File published: Jul 3, 2007
Power-distribution switches, like the TPS203x, operate in retry mode in an overload, but some applications require the switch to latch off. The latch-off function can be implemented using the simple circuit described in this application report.

Model Line

Series: TPS2023 (5)

TPS2023D TPS2023DG4 TPS2023DR TPS2023DRG4 TPS2023P

Manufacturer's Classification

Semiconductors > Power Management > USB Power and Charging Port Controllers > Fixed Current Limited Switch