Datasheet Texas Instruments TPS2030D

ManufacturerTexas Instruments
SeriesTPS2030
Part NumberTPS2030D
Datasheet Texas Instruments TPS2030D

0.22A, 2.7-5.5V Single Hot-Swap IC Hi-Side MOSFET, Fault Report, Act-High Enable 8-SOIC

Datasheets

Power Distribution Switches datasheet
PDF, 816 Kb, Revision: C, File published: Oct 19, 2007
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY75
CarrierTUBE
Device Marking2030
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDownload

Parametrics

Continuous Current(Max)0.2 A
Current Limit TopologyConstant-Current
EnableActive High
Number of Switches1
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
RatingCatalog
USB Switch rDS(on)33 mOhms
Vin(Max)5.5 V
Vin(Min)2.7 V

Eco Plan

RoHSCompliant

Application Notes

  • Protecting Industrial Digital Control Outputs Using Intelligent MOSFETS
    PDF, 55 Kb, File published: Oct 26, 2000
    Digital outputs in industrial applications often must implement some type of protection measure. The integrity of the signal, transmitted over a distance of several meters, can suffer due to fault conditions like a short circuit or an overcurrent, either of which can damage the device driving the signal. To prevent electromagnetic compatibility problems, it may also be necessary to slow down the s
  • Power Management Solutions for Infiniband (SM) I/O Modules
    PDF, 75 Kb, File published: Oct 20, 2000
    InfiniBand, a scalable, modular, channel-based, switched-fabric architecture, is defined for the connection of servers with servers and with storage and networking devices. Because appropriate power management is essential for quality implementations, this report presents straightforward solutions for both high-power and low-power applications as required by the InfiniBand specification.
  • Power Supply Sequencing Solutions for Dual Supply Voltage DSPs (Rev. A)
    PDF, 104 Kb, Revision: A, File published: Jul 5, 2000
    This application report describes power-supply sequencing recommendations and techniques applicable to dual supply voltage DSPs in TI's TMS320C2000 TMS320C5000 and TMS320C6000 families. These techniques take advantage of the reset power good enable and soft-start features available on TI Power Management Products including low drop out regulators switching power supply controllers supply vol
  • A Power-Distribution Switch With Latched Over-Current Protection (Rev. A)
    PDF, 99 Kb, Revision: A, File published: Jul 3, 2007
    Power-distribution switches, like the TPS203x, operate in retry mode in an overload, but some applications require the switch to latch off. The latch-off function can be implemented using the simple circuit described in this application report.

Model Line

Series: TPS2030 (5)

Manufacturer's Classification

  • Semiconductors > Power Management > USB Power and Charging Port Controllers > Fixed Current Limited Switch
EMS supplier