Datasheet Texas Instruments OPA234UA
Manufacturer | Texas Instruments |
Series | OPA234 |
Part Number | OPA234UA |
Low Power, Precision Single-Supply Operational Amplifiers 8-SOIC -40 to 125
Datasheets
OPA234, 2234, 4234: Low Power, Precision Single-Supply Operational Amplifiers datasheet
PDF, 1.0 Mb, Revision: B, File published: Apr 10, 2008
Extract from the document
Prices
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Packaging
Pin | 8 | 8 | 8 |
Package Type | D | D | D |
Industry STD Term | SOIC | SOIC | SOIC |
JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
Package QTY | 75 | 75 | 75 |
Carrier | TUBE | TUBE | TUBE |
Device Marking | OPA | 234U | A |
Width (mm) | 3.91 | 3.91 | 3.91 |
Length (mm) | 4.9 | 4.9 | 4.9 |
Thickness (mm) | 1.58 | 1.58 | 1.58 |
Pitch (mm) | 1.27 | 1.27 | 1.27 |
Max Height (mm) | 1.75 | 1.75 | 1.75 |
Mechanical Data | Download | Download | Download |
Parametrics
Additional Features | N/A |
Architecture | Bipolar |
CMRR(Min) | 86 dB |
CMRR(Typ) | 106 dB |
GBW(Typ) | 0.35 MHz |
Input Bias Current(Max) | 30000 pA |
Iq per channel(Max) | 0.3 mA |
Iq per channel(Typ) | 0.25 mA |
Number of Channels | 1 |
Offset Drift(Typ) | 0.5 uV/C |
Operating Temperature Range | -40 to 125 C |
Output Current(Typ) | 11 mA |
Package Group | SOIC |
Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
Rail-to-Rail | In to V-,Out |
Rating | Catalog |
Slew Rate(Typ) | 0.2 V/us |
Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 25 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 0.1 mV |
Eco Plan
RoHS | Compliant |
Application Notes
- Stop-band limitations of the Sallen-Key, low-pass filterPDF, 573 Kb, File published: Oct 22, 2008
- Q4 2008 Issue Analog Applications JournalPDF, 1.5 Mb, File published: Oct 22, 2008
- Remove the DC Portion of Signals with the ADS7817PDF, 55 Kb, File published: Sep 27, 2000
Unwanted portions of a signal, such as a DC pedestal, can be difficult to reject in a single supply circuit. A DC pedestal voltage most typically appears at the output of an operational amplifier with a small signal riding on top of it. This pedestal voltage is required in the analog domain to insure that the small signal that contains the pertinent information never falls below the ground potenti - Tuning in AmplifiersPDF, 44 Kb, File published: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, File published: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, File published: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Model Line
Series: OPA234 (18)
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps