Datasheet Maxim MAX16154


nanoPower Supervisor and Watchdog Timer


Datasheet MAX16152, MAX16153, MAX16154, MAX16155
PDF, 473 Kb, Language: en, File uploaded: Nov 12, 2019, Pages: 20
nanoPower Supervisor and Watchdog Timer
Extract from the document


Detailed Description

Ultra-Low-Current Supervisor with Dynamic Watchdog in Tiny SOT Package

The MAX16152/MAX16153/MAX16154/MAX16155 ultra-low-current supervisory circuits monitor a single system supply voltage and the integrity of code execution by a microprocessor or microcontroller.

These supervisors assert the reset output whenever the VCC supply voltage is greater than the minimum operating voltage, but less than the reset threshold. After the supply voltage rises above the reset threshold, the reset output remains asserted for the reset timeout period, and then de-asserts. Reset voltage thresholds are available from 1.50V to 5.0V in approximately 100mV increments.

A watchdog timer circuit monitors microprocessor or microcontroller activity. During normal operation, the microprocessor or microcontroller should repeatedly toggle the watchdog input (WDI) before the supervisor’s watchdog timeout period elapses to confirm that the system is executing code properly. If the microprocessor or microcontroller does not provide a valid watchdog input transition before the timeout period expires, the supervisor asserts a watchdog (active-low WDO) output to signal that the system is not executing code as expected. The watchdog output pulse can be used to reset the microprocessor or microcontroller, or it may be used to interrupt the system to warn of execution errors. The MAX16154 feature a logic input (WD_EN) that allows the system to enable and disable the watchdog function.

The MAX16154 are offered in a 0.86mm x 1.27mm, 6-bump WLP. All devices operate over the -40°C to +125°C temperature range.

Other Options

MAX16152 MAX16153 MAX16155

Model Line

Series: MAX16154 (1)

Manufacturer's Classification

  • Power > Voltage Supervisors, Voltage Monitors, and Sequencers

$2 Start Your PCB and SMT. Get coupon code: JLCNY

PCB Design Analysis Software-NextDFM One-click Design Analysis for Manufacturability Layout Engineer Free Forever