Datasheet UT69RH051 (Aeroflex) - 2
| Manufacturer | Aeroflex |
| Description | Radiation-Hardened MicroController |
| Pages / Page | 20 / 2 — 1.0 INTRODUCTION. Table 1. Port 1 Alternate Functions. Port. Alternate. … |
| File Format / Size | PDF / 1.0 Mb |
| Document Language | English |
1.0 INTRODUCTION. Table 1. Port 1 Alternate Functions. Port. Alternate. Alternate Function. Pin. Name. 2.0 SIGNAL DESCRIPTION. VDD:. VSS:
Model Line for this Datasheet
- 5962F9563801QQA 5962F9563801QQC 5962F9563801QQX 5962F9563801QYA 5962F9563801QYC 5962F9563801QYX 5962F9563801VQA 5962F9563801VQC 5962F9563801VQX 5962F9563801VYA 5962F9563801VYC 5962F9563801VYX 5962G9563801QQA 5962G9563801QQC 5962G9563801QQX 5962G9563801QYA 5962G9563801QYC 5962G9563801QYX 5962G9563801VQA 5962G9563801VQC 5962G9563801VQX 5962G9563801VYA 5962G9563801VYC 5962G9563801VYX 5962H9563801QQA 5962H9563801QQC 5962H9563801QQX 5962H9563801QYA 5962H9563801QYC 5962H9563801QYX 5962H9563801VQA 5962H9563801VQC 5962H9563801VQX 5962H9563801VYA 5962H9563801VYC 5962H9563801VYX 5962R9563801QQA 5962R9563801QQC 5962R9563801QQX 5962R9563801QYA 5962R9563801QYC 5962R9563801QYX 5962R9563801VQA 5962R9563801VQC 5962R9563801VQX 5962R9563801VYA 5962R9563801VYC 5962R9563801VYX UT69RH051P-CA UT69RH051P-CC UT69RH051P-CX UT69RH051W-PA UT69RH051W-PC UT69RH051W-PX
Text Version of Document
1.0 INTRODUCTION Table 1. Port 1 Alternate Functions
The UT69RH051 is a radiation-tolerant 8-bit microcontroller
Port Alternate Alternate Function
that is pin equivalent to the MCS-51 industry standard
Pin Name
microcontroller when in a 40-pin DIP. The UT69RH051’s static design allows operation from 1Hz to 20MHz. This data sheet P1.0 T2 External clock input to Timer/ describes hardware and software interfaces to the UT69RH051. Counter 2 P1.1 T2EX Timer/Counter 2 Capture/Reload
2.0 SIGNAL DESCRIPTION
trigger and direction control
VDD:
+5V Supply voltage P1.2 ECI External count input to PCA
VSS:
Circuit Ground P1.3 CEX0 External I/O for PCA capture/
Port 0 (P0.0 - P0.7):
Port 0 is an 8-bit port. Port 0 pins are used compare Module 0 as the low-order multiplexed address and data bus during P1.4 CEX1 External I/O for PCA capture/ accesses to external program and data memory. Port 0 pins use compare Module 1 internal pullups when emitting 1’s and are TTL compatible. P1.5 CEX2 External I/O for PCA capture/
Port 1 (P1.0 - P1.7):
Port 1 is an 8-bit bidirectional I/O port with compare Module 2 internal pullups. The output buffers can drive TTL loads. When the Port 1 pins have 1’s written to them, they are pulled high by P1.6 CEX3 External I/O for PCA capture/ the internal pullups and can be used as inputs in this state. As compare Module 3 inputs, any pins that are externally pulled low sources current because of the pullups. In addition, Port 1 pins have the alternate P1.7 CEX4 External I/O for PCA capture/ uses shown in table 1. compare Module 4
Port 2 (P2.0 - P2.7):
Port 2 is an 8-bit port. Port 2 pins are used as the high-order address bus during accesses to external Program Memory and during accesses to external Data Memory that uses
Table 2. Port 3 Alternate Functions
16-bit addresses (i.e., MOVX@DPTR). Port 2 uses internal
Port Alternate Alternate Function
pullups when emitting 1’s in this mode. During operations that
Pin Name
do not require a 16-bit address, Port 2 emits the contents of the P2 Special Function Registers (SFR). The pins have internal P3.0 RXD Serial port input pullups and drives TTL loads. P3.1 TXD Serial port output
Port 3 (P3.0 - P3.7):
Port 3 is an 8-bit bidirectional I/O port with internal pullups. The output buffers can drive TTL loads. When P3.2 INT0 External interrupt 0 the Port 3 pins have 1’s written to them, they are pulled high by P3.3 INT1 External interrupt 1 the internal pullups and can be used as inputs in this state. As inputs, any pins that are externally pulled low sources current P3.4 T0 External clock input for Timer 0 because of the pullups. In addition, Port 3 pins have the alternate uses shown in table 2. P3.5 T1 External clock input for Timer 1 P3.6 WR External Data Memory write strobe P3.7 RD External Data Memory read strobe 2
The UT69RH051 is a radiation-tolerant 8-bit microcontroller
Port Alternate Alternate Function
that is pin equivalent to the MCS-51 industry standard
Pin Name
microcontroller when in a 40-pin DIP. The UT69RH051’s static design allows operation from 1Hz to 20MHz. This data sheet P1.0 T2 External clock input to Timer/ describes hardware and software interfaces to the UT69RH051. Counter 2 P1.1 T2EX Timer/Counter 2 Capture/Reload
2.0 SIGNAL DESCRIPTION
trigger and direction control
VDD:
+5V Supply voltage P1.2 ECI External count input to PCA
VSS:
Circuit Ground P1.3 CEX0 External I/O for PCA capture/
Port 0 (P0.0 - P0.7):
Port 0 is an 8-bit port. Port 0 pins are used compare Module 0 as the low-order multiplexed address and data bus during P1.4 CEX1 External I/O for PCA capture/ accesses to external program and data memory. Port 0 pins use compare Module 1 internal pullups when emitting 1’s and are TTL compatible. P1.5 CEX2 External I/O for PCA capture/
Port 1 (P1.0 - P1.7):
Port 1 is an 8-bit bidirectional I/O port with compare Module 2 internal pullups. The output buffers can drive TTL loads. When the Port 1 pins have 1’s written to them, they are pulled high by P1.6 CEX3 External I/O for PCA capture/ the internal pullups and can be used as inputs in this state. As compare Module 3 inputs, any pins that are externally pulled low sources current because of the pullups. In addition, Port 1 pins have the alternate P1.7 CEX4 External I/O for PCA capture/ uses shown in table 1. compare Module 4
Port 2 (P2.0 - P2.7):
Port 2 is an 8-bit port. Port 2 pins are used as the high-order address bus during accesses to external Program Memory and during accesses to external Data Memory that uses
Table 2. Port 3 Alternate Functions
16-bit addresses (i.e., MOVX@DPTR). Port 2 uses internal
Port Alternate Alternate Function
pullups when emitting 1’s in this mode. During operations that
Pin Name
do not require a 16-bit address, Port 2 emits the contents of the P2 Special Function Registers (SFR). The pins have internal P3.0 RXD Serial port input pullups and drives TTL loads. P3.1 TXD Serial port output
Port 3 (P3.0 - P3.7):
Port 3 is an 8-bit bidirectional I/O port with internal pullups. The output buffers can drive TTL loads. When P3.2 INT0 External interrupt 0 the Port 3 pins have 1’s written to them, they are pulled high by P3.3 INT1 External interrupt 1 the internal pullups and can be used as inputs in this state. As inputs, any pins that are externally pulled low sources current P3.4 T0 External clock input for Timer 0 because of the pullups. In addition, Port 3 pins have the alternate uses shown in table 2. P3.5 T1 External clock input for Timer 1 P3.6 WR External Data Memory write strobe P3.7 RD External Data Memory read strobe 2
