Electronics ru
Advanced Search +

Datasheet Texas Instruments CC2533F64RHAT

Datasheet Texas Instruments CC2533F64RHAT

ManufacturerTexas Instruments
Part NumberCC2533F64RHAT

A True System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 and ZigBee Applications 40-VQFN -40 to 125


  • Download » Datasheet, PDF, 1.1 Mb, 06-25-2010
    An Optimized System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 Remote Control Ap datasheet


Family: CC2533


Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo


Package TypeRHARHA
Package QTY250250
Device MarkingF64CC2533
Width (mm)66
Length (mm)66
Thickness (mm).9.9
Pitch (mm).5.5
Max Height (mm)11
Mechanical DataDownload »Download »


AES 128 Bit Hardware EncryptionYes
Data Rate(Max)250 kbps
Device TypeWireless MCU
FlashUp to 96 KB
Frequency24 MHz
Package Size: mm2:W x L40VQFN: 36 mm2: 6 x 6(VQFN) PKG
RAM size4,4,6 KB
RX Current (Lowest)20.0 mA
Sensitivity (Best)-97 dBm
Standby Power0.4 LPM3-uA
TX Power7 dBm
TechnologyRF4CE,SimpleLink CC2x
Throughput(Max)0.25 Mbps
USB 2.0No
Wakeup Time (PD-->RX/TX)600 us

Eco Plan


Design Kits & Evaluation Modules

  • Daughter Cards: CC2533EMK
    CC2533 Evaluation Module Kit
    Lifecycle Status: Active (Recommended for new designs)
  • Development Kits: CC2533DK-RF4CE-BA
    CC2533 RF4CE Development Kit
    Lifecycle Status: Obsolete (Manufacturer has discontinued the production of the device)
  • JTAG Emulators/ Analyzers: CC-DEBUGGER
    Debugger and Programmer for RF System-on-Chips
    Lifecycle Status: Active (Recommended for new designs)
  • Daughter Cards: CC2531EMK
    CC2531 USB Evaluation Module Kit
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Download » Application Notes, PDF, 11.8 Mb, 01-09-2015
    Guide for Manufacture Testing of RF4CE Products
    This application report describes a sample implementation of a manufacturing line test program for RF4CE products. It is based on RemoTI-Linux, which is the Linux host driver for CC253x RemoTI Network Processor (RNP). It includes the ability to setup a fake pairing between the remote control and target side, how to enter test mode, how to change RF parameters, and so forth. It helps customers to u
  • Download » Application Notes, PDF, 828 Kb, Revision: B, 12-16-2014
    RemoTIв„ў Capacitive Touch Sensing (Rev. B)
    As consumers become accustomed to elegant touch interfaces on a variety of devices, these capabilities are becoming more expected on a greater number of devices. The CC253x devices used in RF4CE applications provide hardware support for Capacitive Touch Sensing (Capacitive Sensing),
  • Download » Application Notes, PDF, 110 Kb, Revision: C, 11-26-2013
    AN100 - Crystal Selection Guide (Rev. C)
    RF systems are highly dependent on accurate clocks for correct operation. A deviation in clock frequency is directly reflected as a deviation in radio frequency. This can degrade RF performance, violate legal requirements or in worst case lead to a non-functioning system. The scope of this application report is to give the design engineer a quick guide on how to design, tune and verify the
  • Download » Application Notes, PDF, 112 Kb, 05-19-2016
    Voice Over Remote Control
    This application report describes the voice over RF protocol used for Texas Instruments Bluetooth В® low energy (BLE) and RF4CE remote control solutions.
  • Download » Application Notes, PDF, 733 Kb, 01-24-2013
    DN041 -- Using CC253X or CC254X with Dipole PCB Antenna
  • Download » Application Notes, PDF, 426 Kb, 09-05-2012
    AN118 -- Flash programming of CC253x/4x devices
    Application note AN118 demonstrates how to use the CC debug interface to perform various flash related tasks on CC253x / CC254x System-on-Chips. It is distributed along with a example code using a CC2530 as a programmer – but is easily ported to other devices. The application note explains in detail the example code, which covers how to enter debug mode and how to read/write/erase the flash memory
  • Download » Application Notes, PDF, 805 Kb, Revision: A, 10-26-2011
    AN107 - Murata Balun for CC253x and CC254x, LFB182G45BG2D280 (Rev. A)
  • Download » Application Notes, PDF, 456 Kb, Revision: B, 11-06-2012
    AN081 -- Johanson Technology Balun Optimized for CC253X, CC254X, CC257X, CC853X (Rev. B)
  • Download » Application Notes, PDF, 2.4 Mb, 02-08-2017
    ETSI EN 300 328 Blocking Test for Bluetooth Low Energy
    This application report describes the setup and procedure used to measure the new ETSI EN receiver (RX) blocking test added to version v2.1.1 of the ETSI EN 300 328 harmonized standard.
  • Download » Application Notes, PDF, 456 Kb, Revision: A, 08-02-2012
    AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A)
  • Download » Application Notes, PDF, 1.9 Mb, 10-14-2010
    DN034 -- YAGI 2.4 GHz PCB Antenna
  • Download » Application Notes, PDF, 126 Kb, Revision: T, 10-12-2011
    DN000 - Design Note Overview (Rev. T)
  • Download » Application Notes, PDF, 2.3 Mb, 08-26-2010
    DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary
    DN031 -- Design Notes
  • Download » Application Notes, PDF, 1.8 Mb, Revision: B, 10-06-2010
    AN058 -- Antenna Selection Guide (Rev. B)
  • Download » Application Notes, PDF, 138 Kb, Revision: A, 02-12-2013
    DN035 -- Antenna Quick Guide (Rev. A)

Moldel Line

Series: CC2533 (6)

Manufacturer's Classification

  • Semiconductors > Wireless Connectivity > RF4CE
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus