Electronics ru
Advanced Search +

Datasheet Texas Instruments LM358PW

Datasheet Texas Instruments LM358PW

ManufacturerTexas Instruments
Part NumberLM358PW

Dual Operational Amplifiers 8-TSSOP 0 to 70


  • Download » Datasheet, PDF, 1.9 Mb, Revision: U, 01-07-2017, File uploaded 03-20-2018
    LM358, LM258, LM158, LM2904 Dual Operational Amplifiers datasheet
    Docket ↓
    Folder Order
    Now Support &
    Community Tools &
    Software Technical
    Documents LM158, LM158A, LM258, LM258A
    LM358, LM358A, LM2904, LM2904V
    SLOS068U – JUNE 1976 – REVISED JANUARY 2017 LM358, LM258, LM158, LM2904 Dual Operational Amplifiers
    1 Features 2 Applications 1 Wide Supply Ranges
    – Single Supply: 3 V to 32 V
    (26 V for LM2904)
    – Dual Supplies: ±1.5 V to ±16 V
    (±13 V for LM2904)
    Low Supply-Current Drain, Independent of Supply
    Voltage: 0.7 mA Typical
    Wide Unity Gain Bandwidth: 0.7 MHz
    Common-Mode Input Voltage Range Includes
    Ground, Allowing Direct Sensing Near Ground
    Low Input Bias and Offset Parameters
    – Input Offset Voltage: 3 mV Typical
    A Versions: 2 mV Typical
    – Input Offset Current: 2 nA Typical
    – Input Bias Current: 20 nA Typical ...


Family: LM158, LM158A, LM258, LM258A, LM2904, LM2904V, LM358, LM358A


Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo


Package TypePW
Industry STD TermTSSOP
Package QTY150
Device MarkingL358
Width (mm)4.4
Length (mm)3
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataDownload »


Additional FeaturesN/A
CMRR(Min)65 dB
CMRR(Typ)80 dB
GBW(Typ)0.7 MHz
Input Bias Current(Max)150000 pA
Iq per channel(Max)0.6 mA
Iq per channel(Typ)0.35 mA
Number of Channels2
Offset Drift(Typ)7 uV/C
Operating Temperature Range0 to 70 C
Output Current(Typ)30 mA
Package GroupTSSOP
Package Size: mm2:W x L8TSSOP: 19 mm2: 6.4 x 3(TSSOP) PKG
Rail-to-RailIn to V-
Slew Rate(Typ)0.3 V/us
Total Supply Voltage(Max)32 +5V=5, +/-5V=10
Total Supply Voltage(Min)3 +5V=5, +/-5V=10
Vn at 1kHz(Typ)40 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)7 mV

Eco Plan


Application Notes

  • Download » Application Notes, PDF, 313 Kb, Revision: B, 04-23-2013
    AN-116 Use the LM158/LM258/LM358 Dual, Single Supply Op Amp (Rev. B)
    This application note discusses the use of the LM158/LM258/LM358 dual op amp when operated from asingle supply.
  • Download » Application Notes, PDF, 370 Kb, Revision: B, 05-01-2013
    AN-30 Log Converters (Rev. B)
    One of the most predictable non-linear elements commonly available is the bipolar transistor. Therelationship between collector current and emitter base voltage is precisely logarithmic from currentsbelow one picoamp to currents above one milliamp. Using a matched pair of transistors and integratedcircuit operational amplifiers, it is relatively easy to construct a linear to logarithmic conv
  • Download » Application Notes, PDF, 867 Kb, Revision: B, 04-23-2013
    AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B)
    This application note provides new design ideas and discusses the positive impact of designing with theDual Norton amplifier.
  • Download » Application Notes, PDF, 940 Kb, Revision: B, 05-01-2013
    AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B)
    Since the introduction of monolithic IC amplifiers there has been a continual improvement in DC accuracy.Bias currents have been decreased by 5 orders of magnitude over the past 5 years. Low offset voltagedrift is also necessary in a high accuracy circuits. This is evidenced by the popularity of low drift amplifiertypes as well as the requests for selected low-drift op amps. However, until n
  • Download » Application Notes, PDF, 272 Kb, 05-02-2004
    Audio Applications of Linear Integrated Circuits
  • Download » Application Notes, PDF, 1.1 Mb, Revision: B, 05-06-2013
    AN-262 Applying Dual and Quad FET Op Amps (Rev. B)
    The availability of dual and quad packaged FET op amps offers the designer all the traditional capabilitiesof FET op amps, including low bias current and speed, and some additional advantages. The cost-peramplifieris lower because of reduced package costs. This means that more amplifiers are available toimplement a function at a given cost, making design easier. At the same time, the availab
  • Download » Application Notes, PDF, 747 Kb, Revision: C, 04-22-2013
    AN-263 Sine Wave Generation Techniques (Rev. C)
    This application note describes the sine wave generation techniques to control frequency, amplitude, anddistortion levels.
  • Download » Application Notes, PDF, 262 Kb, Revision: B, 05-06-2013
    AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B)
    Of all common environmental parameters, humidity is perhaps the least understood and most difficult tomeasure. The most common electronic humidity detection methods, albeit highly accurate, are not obviousand tend to be expensive and complex (See Box). Accurate humidity measurement is vital to a number ofdiverse areas, including food processing, paper and lumber production, pollution monitor
  • Download » Application Notes, PDF, 91 Kb, 10-02-2002
    Get More Power Out of Dual or Quad Op-Amps

Moldel Line

Series: LM358 (21)

Manufacturer's Classification

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus