Development Board mikroElektronika PICPLC16 V6

PICPLC16 v6 is a PLC system with 16 opto-inputs and 16 relays (for currents up to 16A). Very fast USB 2.0 programmer with a simplified driver installation.

Detailed Description

mikroICD is a hardware tool designed for testing and debugging programs on PIC microcontrollers. When placed into the box, the system may be used in moist and dusty environment. Design your control system easier than ever before.

Serial Ethernet ENC28J60 uses SPI communication. Telit GM862 GSM/GPRS module can be placed on the board for GSM/GPRS communication.

Development Board mikroElektronika PICPLC16 V6


Features

  • RS-232 communication with a PC or an MCU is performed via screw terminal.
  • System can be easily configured by means of DIP switches. Each DIP switch configures one part of the system.
  • 3.3V Voltage Regulator is used for stable Serial Ethernet power supply.
  • RS485 communication module enables the system to be connected to 485 network.
  • A/D converter MCP3204 is used for precise analog input measurement.
  • High-efficient switching unit enables stable power supply.
  • Voltage reference for ADC can be either VCC (5V) or 4.096 V.
  • All pins are connected to the IDC10 connectors used for further expansion and connecting.
  • Antenna can be placed on the board using antenna holder.
  • On-board jumpers are used for pull-up/pull-down port configuration.
  • 16 input lines with fast optocouplers HP2630 with Schmitt trigger.
  • DIP switch is used to easily separate port pins from pull-up/pull-down resistors.
  • Very fast USB 2.0 programmer with mikroICD. There is no need for connecting the external programmer.
  • ENC28J60 is a 28-pin, 10BASE-T stand-alone Ethernet Controller with SPI interface.
  • GSM/GPRS Connector is used for connecting Telit GM862 GSM/GPRS.
  • PIC18F4520 is the microcontroller controlling the PICPLC16 v6 PLC system.
  • Speaker and microphone are connected to the GSM/GPRS module via screw terminal.
  • 16 relays for current up to 16A. Each relay has a LED for optical signalization.
  • Real-Time Clock (RTC) DS1307 with a battery supply is used to keep track of the current time.
  • High-current Darlington arrays ULN2804 are used for driving output relays.
  • All MCU pins are marked on the back of the board.
     

The PICPLC16 v6 PLC System is packed in the protective box along with the relevant documentation and product CD. This box is very resistant to all kinds of damages and shocks. Note: UTP Cable, Telit GM862 GSM/GPRS module with antenna and port expander are not included in the price. The package contains:

  1. PICPLC16 v6 PLC development system.
  2. USB cable.
  3. CD with software, drivers and examples in C, BASIC and Pascal.
  4. Printed documentation.

PICPLC16 V6 Development Board Schematic

mikroe.com

Other Names:

MEPICPLC16 V6, PICPLC16 V6, ME PICPLC16 V6, PICPLC16 V6, ME-PICPLC16 V6 PICPLC16 V6, ME-PICPLC16 V6 PICPLC16 V6

You may have to register before you can post comments and get full access to forum.
EMS supplier