Evaluation Board Keil MCB1000

Detailed Description

With this hands-on process, you can determine the hardware and software requirements for current and future product development.

The MCB1000 evaluation board features the following easy access to many of the on-chip peripherals.

• Solar Power
  • A 39mm x 35mm solar collector module to optionally power the MCB1000 board.
• Temperature Sensor
  • A digital sensor for monitoring board temperature.
• 8Kb EEPROM
  • An 8Kb EEPROM accessible via I2C bus.
• USB 2.0 Full Speed Interface
  • A standard USB Micro AB connector provides power and USB Device capabilities.
• Synchronous Serial Port
  • A 20-pin Molex connector on the MCB1000 for provides access to the Synchronous Serial Port of the LPC1343.
• Cortex Download and Debug
  • The MCB1000 board incorporates a Cortex Debug interface. When coupled with the ULINK2 USB-JTAG adapter, the Serial Wire JTAG interface allows flash programming and debugging.

The MCB1000 kit includes:

• The MCB1000 Evaluation Board.
• A µVision IDE Quick Start Guide.
• An ARM Development Tools Overview.
• A USB A to USB Micro B cable.
• A CD-ROM that includes:
  • An evaluation version of the Keil MDK-ARM Microntroller Development Kit.
  • Example programs for the MCB1000 Evaluation Board.
  • The MCB1000 Evaluation Board User's Manual (this manual).
• Example Programs for the MCB1000 Evaluation Board are located in the folder KEILARMBOARDSKEILMCB1000. All examples can be compiled and debugged using the Evaluation Version.

Schematic diagram MCB1000 Evaluation board