RadioLocman.com Electronics ru
Advanced Search +
  

Rohde&Schwarz RTE1154 Oscilloscope

Rohde&Schwarz RTE1154  Oscilloscope

ManufacturerRohde&Schwarz
SeriesRTE1000
Part NumberRTE1154

RTE1000 oscilloscopes offer a fully integrated multi-domain test solution with time, frequency, protocol and logic analysis functions. From embedded design development to power electronics analysis to general debugging, the RTE1000 handles everyday T&M challenges quickly, accurately and easily.

I    Up to 16-bit vertical resolution
I    200 Msample deep memory to analyze long sequences
I    Quickly find signal faults with 1 million waveforms/s
I    Touch-optimized operation

Documents

  • Download » Product Brochure PDF, 13.3 Mb, Language: en, Revision: 13.01, File published: Jul 16, 2018
    Probes and accessories for Rohde & Schwarz oscilloscopes - product brochure
    Docket ↓
    п»їProduct Brochure | Version 13.01 Probes and accessories
    for Rohde & Schwarz
    oscilloscopes Probes_and_accessories_bro_en_3606-8866-12_v1301.indd 1 16.07.2018 16:25:43 Probes and
    accessories for
    Rohde & Schwarz
    oscilloscopes
    At a glance
    Test applications for oscilloscopes range from
    debugging complex electronic circuits to measuring
    the signal integrity of high-speed bus signals and
    characterizing power electronics with dangerous
    voltage levels. Measurement accuracy and operator
    safety depend on the probes and accessories that
    are used. Rohde & Schwarz passive probes are the perfect accessory for general measurement applications involving lowfrequency signals. The very fine, spring-loaded tip allows
    precise and reliable contacting of signal lines.
    Active broadband probes are ideal for applications where
    low loading on the DUT is crucial or when the measured signal contains high-frequency signal components.
    Rohde & Schwarz broadband probes feature a very low
    load and a wide dynamic range. The integrated, highprecision DC voltmeter permits fast and easy testing (both
    differential and single-ended) of DC voltage levels on signal lines, irrespective of the oscilloscope settings. The configurable, integrated micro button makes it easy to operate
    the oscilloscope when measuring with multiple probes.
    An extensive range of probe accessories ensures optimal
    contacting. ...
  • Download » Product Brochure PDF, 17.8 Mb, Language: en, Revision: 14.00, File published: Jun 11, 2018
    RTE Oscilloscope - product brochure
    Docket ↓
    R&SВ®RTE
    Oscilloscope
    Scope of the art Multi
    Domain п»їProduct Brochure | Version 14.00 year RTE_bro_en_3606-9033-12_v1400.indd 1 11.06.2018 14:09:31 R&SВ®RTE
    Oscilloscope
    At a glance
    Truly uncompromised in performance and
    impressively user-friendly – that’s the R&S®RTE
    oscilloscope.
    With bandwidths from 200В MHz to 2В GHz and top performance parameters, the R&SВ®RTE oscilloscopes set standards in their class:
    вќ™вќ™ Highest sampling rate of 5В Gsample/s and deepest
    memory of 200В Msample for accurate acquisition of long
    signal sequences
    вќ™вќ™ Acquisition rate of more than oneВ million waveforms/s for
    finding signal faults quickly
    вќ™вќ™ Extremely low-noise frontends and 16-bit vertical
    resolution in high definition mode for precise results
    вќ™вќ™ Highly accurate digital trigger system with virtually no
    jitter for triggering on smallest signal details in realtime Tools such as QuickMeas, fast mask tests, powerful spectrum analysis, history function and 77 automatic measurement functions are supplied as standard. Results are available fast thanks to hardware-assisted implementation of
    the measurement tools in the Rohde & Schwarz ASIC. The
    results are based on a large number of waveforms to provide statistically conclusive information.
    R&SВ®RTE oscilloscopes support dedicated application solutions for complex analyses, including trigger and decoding options for serial protocols and a power analysis option. The mixed signal option provides 16 digital channels
    for analyzing logical components in embedded designs. ...
  • Download » Datasheet PDF, 2.1 Mb, Language: en, Revision: 19.00, File published: Mar 20, 2018
    RT-Zxx high voltage and high current probes - data sheet
    Docket ↓
    Data Sheet | V19.00 R&SВ®RT-Zxx
    High Voltage and Current Probes
    Specifications RT-Zxx_High_voltage_dat-sw_en_5214-2362-22_v1900_Cover.indd 1 19.03.2018 14:17:36 Version 19.00, March 2018 CONTENTS
    Definitions. 3
    Probe/oscilloscope chart . 4
    R&SВ®RT-ZH03 high voltage passive probe . 6
    R&SВ®RT-ZH10/-ZH11 high voltage passive probes . 9
    R&SВ®RT-ZI10(C)/-ZI11 isolated probes . 12
    R&SВ®RT-ZD002/-ZD003 high voltage differential probes . 16
    R&SВ®RT-ZD01 high voltage differential probe. 19
    R&SВ®RT-ZD02/-ZD08 high voltage differential probes . 22
    R&SВ®RT-ZHD07 high voltage differential probe . 24
    R&SВ®RT-ZHD15/-ZHD16 high voltage differential probe . 29
    R&SВ®RT-ZHD60 high voltage differential probe . 33
    R&SВ®RT-ZC02/-ZC03 current probes . 36
    R&SВ®RT-ZC05B/-ZC10(B)/-ZC15B/-ZC20(B)/-ZC30 current probes . 40
    R&SВ®RT-ZA13 probe power supply . 45
    Ordering information . 46 2 Rohde & Schwarz R&SВ®RT-Zxx High Voltage and Current Probes Version 19.00, March 2018 Definitions
    General
    Product data applies under the following conditions:
    п‚ п‚ п‚ Three hours storage at ambient temperature followed by 30 minutes warm-up operation
    Specified environmental conditions met
    Recommended calibration interval adhered to Specifications with limits ...
  • Download » Datasheet PDF, 1.1 Mb, Language: en, Revision: 18.00, File published: Jan 15, 2018
    RT-Zxx standard probes - data sheet
    Docket ↓
    Data Sheet | V18.00 R&SВ®RT-Zxx
    Standard Probes
    Specifications RT-Zxx_Standard_dat-sw_en_3607-3851-22_v1800_Cover.indd 1 18.12.2017 16:10:53 Version 18.00, December 2017 CONTENTS
    Definitions. 3
    Probe/oscilloscope chart . 4
    R&SВ®RT-ZP03 passive probe . 5
    R&SВ®RT-ZP05(S) passive probe . 8
    R&SВ®RT-ZP10, R&SВ®RTM-ZP10 passive probes . 11
    R&SВ®RT-ZP1X passive probe. 14
    R&SВ®RT-ZL03/-ZL04 logic probes . 16
    Ordering information . 18 2 Rohde & Schwarz R&SВ®RT-Zxx Standard Probes Version 18.00, December 2017 Definitions
    General
    Product data applies under the following conditions:
    п‚ п‚ п‚ Three hours storage at ambient temperature followed by 30 minutes warm-up operation
    Specified environmental conditions met
    Recommended calibration interval adhered to Specifications with limits
    Represent warranted product performance by means of a range of values for the specified parameter. These specifications are marked
    with limiting symbols such as , ≥, ±, or descriptions such as maximum, limit of, minimum. Compliance is ensured by testing or is
    derived from the design. Test limits are narrowed by guard bands to take into account measurement uncertainties, drift and aging, if
    applicable.
    Specifications without limits
    Represent warranted product performance for the specified parameter. These specifications are not specially marked and represent
    values with no or negligible deviations from the given value (e.g. dimensions or resolution of a setting parameter). Compliance is ensured ...
  • Download » Datasheet PDF, 1.7 Mb, Language: en, Revision: 22.00, File published: Jan 15, 2018
    RT-Zxx high bandwidth probes - data sheet
    Docket ↓
    Data Sheet | V22.00 R&SВ®RT-Zxx
    High Bandwidth Probes
    Specifications RT-Zxx_High_bandwidth_dat-sw_en_3607-3868-22_v2200_Cover.indd 1 09.01.2018 13:24:07 Version 22.00, January 2018 CONTENTS
    Definitions. 3
    Probe/oscilloscope chart . 4
    R&SВ®RT-ZZ80 transmission line probe . 6
    R&SВ®RT-ZS10L active probe . 8
    R&SВ®RT-ZS10/-ZS10E/-ZS20/-ZS30 active probes . 11
    R&SВ®RT-ZS60 active probe . 16
    R&SВ®RT-ZD10/-ZD20/-ZD30 differential probes . 19
    R&SВ®RT-ZD40 differential probe. 24
    R&SВ®RT-ZM15/30/60/90 modular probes . 27
    R&SВ®RT-ZPR20/-ZPR40 power rail probes . 33
    R&SВ®RT-ZA9 probe box to N/USB adapter . 36
    Ordering information . 37 2 Rohde & Schwarz R&SВ®RT-Zxx High Bandwidth Probes Version 22.00, January 2018 Definitions
    General
    Product data applies under the following conditions:
    п‚ п‚ п‚ Three hours storage at ambient temperature followed by 30 minutes warm-up operation
    Specified environmental conditions met
    Recommended calibration interval adhered to Specifications with limits
    Represent warranted product performance by means of a range of values for the specified parameter. These specifications are marked
    with limiting symbols such as , ≥, ±, or descriptions such as maximum, limit of, minimum. Compliance is ensured by testing or is
    derived from the design. Test limits are narrowed by guard bands to take into account measurement uncertainties, drift and aging, if ...
  • Download » Datasheet PDF, 2.5 Mb, Language: en, Revision: 16.01, File published: Dec 5, 2017
    RTE Digital oscilloscope - data sheet
    Docket ↓
    R&SВ®RTE
    Digital Oscilloscope
    Specifications Data Sheet | Version 16.01 year RTE_dat-sw_en_3607-1494-22_v1601_cover.indd 1 07.11.2017 14:03:49 Version 16.01, November 2017 CONTENTS
    Definitions . 4
    Base unit . 5
    Vertical system . 5
    Horizontal system . 7
    Acquisition system . 7
    High definition mode . 8
    Trigger system . 8
    RF characteristics . 10
    Waveform measurements . 11
    Mask testing . 12
    Waveform math . 13
    Search and mark function . 13
    Display characteristics . 14
    Input and output. 14 General data . 15
    Options . 17
    R&SВ®RTE-B1. 17
    Vertical system. 17
    Horizontal system. 17
    Acquisition system . 17
    Trigger system . 17 ...
  • Download » Datasheet PDF, 334 Kb, Language: en, File uploaded: Jul 23, 2018
    RT-ZFxx Oscilloscope Test Fixtures - Data sheet 334 kB | V 07.00, 16-May-2017 - PD 3606.7653.22
    Docket ↓
    R&SВ®RT-ZFxx
    Oscilloscope Test
    Fixtures
    Specifications
    R&SВ®RT-ZF1 USB 2.0 compliance test fixture set
    The USB 2.0 compliance test fixture set contains a signal quality board and a load board for testing USB 2.0 (high speed),
    USB 1.1 (full speed) and USB 1.0 (low speed). It is used in combination with the R&SВ®RTO digital oscilloscope, the R&SВ®RTO-K21
    option and the R&SВ®ScopeSuite software.
    General data
    Temperature loading operating temperature range
    storage temperature range Power supply 0 В°C to +45 В°C
    –40 °C to +70 °C
    5.0 V DC В± 0.25 V via USB R&SВ®RT-ZF2 Ethernet compliance test fixture set
    The Ethernet compliance test fixture set contains the test fixture board and a network analyzer calibration board for testing the
    physical layer of the Ethernet standards 10BASE-T, 100BASE-TX, 1000BASE-T and 10GBASE-T. It is used in combination with the
    R&SВ®RTO digital oscilloscope, the R&SВ®RTO-K22 option and the R&SВ®ScopeSuite software.
    General data
    Temperature loading
    Dimensions (W Г— H Г— L) operating temperature range
    storage temperature range
    test fixture board
    calibration board 0 В°C to +45 В°C
    –40 °C to +70 °C ...
  • Download » User Manual PDF, 52.9 Mb, Language: en, Revision: 13 (FW 3.70), File published: Dec 7, 2017
    RTE user manual
    Docket ↓
    R&SВ®RTE
    Digital Oscilloscope
    User Manual (=J:P2)
    User Manual 1326.1032.02 в”Ђ 13 This manual describes the following R&SВ®RTE models with firmware version 3.70:
    в—Џ R&SВ®RTE1022: 200 MHz, 2 channels (1326.2000K22 and 1317.2500K22)
    в—Џ R&SВ®RTE1024: 200 MHz, 4 channels (1326.2000K24 and 1317.2500K24) в—Џ R&SВ®RTE1032: 350 MHz, 2 channels (1326.2000K32 and 1317.2500K32) в—Џ R&SВ®RTE1034: 350 MHz, 4 channels (1326.2000K34 and 1317.2500K34) в—Џ R&SВ®RTE1052: 500 MHz, 2 channels (1326.2000K52 and 1317.2500K52) в—Џ R&SВ®RTE1054: 500 MHz, 4 channels (1326.2000K54 and 1317.2500K54) в—Џ R&SВ®RTE1102: 1 GHz, 2 channels (1326.2000K62 and 1317.2500K02) в—Џ R&SВ®RTE1104: 1 GHz, 4 channels (1326.2000K64 and 1317.2500K04) в—Џ R&SВ®RTE1152: 1,5 GHz, 2 channels (1326.2000K72) в—Џ R&SВ®RTE1154: 1,5 GHz, 4 channels (1326.2000K74) в—Џ R&SВ®RTE1202: 2 GHz, 2 channels (1326.2000K82) в—Џ R&SВ®RTE1204: 2 GHz, 4 channels (1326.2000K84) В© 2017 Rohde & Schwarz GmbH & Co. KG
    MГјhldorfstr. 15, 81671 MГјnchen, Germany
    Phone: +49 89 41 29 -0
    Fax: +49 89 41 29 12 164
    Email: info@rohde-schwarz.com
    Internet: www.rohde-schwarz.com
    Subject to change – Data without tolerance limits is not binding.
    R&SВ® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
    Trade names are trademarks of their owners.
    Throughout this manual, products from Rohde & Schwarz are indicated without the В® symbol , e.g. R&SВ®RTE is indicated as
    R&S RTE. Basic Safety Instructions
    Always read through and comply with the following safety instructions!
    All plants and locations of the Rohde & Schwarz group of companies make every effort to keep the safety
    standards of our products up to date and to offer our customers the highest possible degree of safety. Our
    products and the auxiliary equipment they require are designed, built and tested in accordance with the
    safety standards that apply in each case. Compliance with these standards is continuously monitored by
    our quality assurance system. The product described here has been designed, built and tested in
    accordance with the EC Certificate of Conformity and has left the manufacturer’s plant in a condition fully ...

Prices

Parametrics

Bandwidth1.5 GHz
Memory Depth max200 Msample
Number of Channels4
Optional MSO16 digital channels
Sample Rate5 Gsample/s

Other Options

RTO2000

Moldel Line

Series: RTE1000 (12)

Manufacturer's Classification

  • Test and measurement > Oscilloscopes
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus