Almost every wall power supply has no indicator showing whether current is consumed by the load or not. It seems that this was a shortcoming that was not only noticed by me: I once saw the solution given in Figure 1. Figure 1. Wall power supply ...
LM317 fans will recognize Figure 1 as the traditional LM317 constant current source topology. It closely regulates I OUT = V ADJ /R S by forcing the OUTPUT pin to be V ADJ = 1.25 V positive relative to the ADJ pin. Thus, I OUT = V ADJ /R S to a ...
Receiving infrared (IR) signals while conserving system power is difficult, and typically requires the inclusion of complex power-management routines in the firmware. You can avoid that problem by disconnecting power to the microcontroller when IR ...
Plastic Silicon Infrared Phototransistor The QSE113/114 is a silicon phototransistor encapsulated in a wide angle, infrared transparent, black plastic sidelooker package.
Plastic Silicon Infrared Phototransistor The QSE113/114 is a silicon phototransistor encapsulated in a wide angle, infrared transparent, black plastic sidelooker package.
Introduction In general, muting and/or signal switching is done by relays, FETs or CMOS analogue switch ICs. All have limitations, but a little known technique that really doesn't look like it could ever work is to use bipolar transistors. The ...
This design idea revisits another: “PWM power DAC incorporates an LM317” ( Ref. 1 ). Like the earlier circuit, this one implements a power DAC by integrating an LM317 positive regulator into a mostly passive PWM topology. It exploits ...
P-Channel 1.8V Specified PowerTrench MOSFET This P-Channel 1.8V specified MOSFET uses Fairchild’s low voltage PowerTrench process. It has been optimized for battery power management applications.
Instead of the conventional approach of backing up a DAC with an amplifier to boost output, this design idea charts a less traveled by path to power. It integrates an LM317 positive regulator with a simple 8-bit PWM DAC topology to obtain a robust ...