Circuits & Schematics: Volt - 4

Search for: "Volt"
Search results: 97 Output: 31-40
  1. .. maximum separation distance of the probes. Let me explain further. The circuit uses a 4050B CMOS hex buffer working on a 5 volt supply. All gates are biased off by the 10M resistors connected between ground and buffer input. The common probe ...
    15-06-2009
  1. .. is not affected even when the mains voltage falls as low as 50V or goes as high as 280V. During Lab testing regulated 12-volt supply for circuit operation was used.)
    24-07-2009
  1. .. The circuit is centered around the IR53H420 Ballast Driver Hybrid which contains the IR2153 Ballast Driver IC and two 500 volt size 2 HEXFET’s in a half bridge configuration. With a 120 volt AC line input (AC1-N), the voltage is ...
    02-10-2009
  2. .. at 325 RPM, making it excellent as an electricity generator. However, pretty much any permanent magnet motor with a good volt/RPM ratio will do. Keep in mind that if you want to generate useful electricity, you will need to produce at ...
    19-10-2009
  3. .. tape drives). The best apparently are a couple of models of motor made by Ametek. The best motor made by Ametek is a 99 volt DC motor that works great as a generator. Unfortunately, they are almost impossible to locate these days. There ...
    26-10-2009
  4. .. managed to score one of the good 30 volt Ametek motors off of Ebay . for only $26. They don't go that cheap these days. People are catching on to the fact ...
    02-11-2009
  5. .. a similar manner, but many do. BC337-40 can start oscillations at a relatively low voltage, other types generally require a volt or two more. If experimenting, be careful not to punch a hole through the device under test: they oscillate at ...
    15-12-2009
  6. .. This circuit will power a 6 inch 4 Watt fluorescent tube off a 12 Volt supply, consuming 300 mA. It may also be powered by a suitably rated universal AC/DC adapter. Advantages of the ...
    05-11-2008
  7. Circuits Domestic LMC7211 LM358
    .. FET, which can turn on a beeper or activate a relay. If a low power voltage comparator is used, such as the LMC7211 , a 9 volt battery will power the circuit for many years. The more popular LM358 would also work but would draw more ...
    31-03-2009
  8. .. my impact on the planet. Also, because this controller is so simple, it only needs one power suply, so, it only needs 1 12 Volt (for both the logic and the motors), instead of 1 5 Volt (for the logic) and 1 12 Volt (for the motors). This ...
    07-05-2009

Sort by: relevance / date

Search "Volt" on other search engines: Only-DataSheet.com Google
EMS supplier