.. circuit can be powered with 7 ~ 12V and the relay must be for that voltage. Software The software was written in C using AVR Studio and WinAVR library. The ADC is read constantly, and the returned value is compared with a variable. This ...
.. and infrared hardware unit. Host program was compiled using Lazarus Freepascal. Device firmware was compiled using WinAVR (AVR-GCC). The implementation uses custom device class, required simple inf file and libusb driver on PC. Infrared data ...
This multimeter was designed to measure output voltage and current in a PSU, where the current sense shunt resistor is connected in series with load at the negative voltage rail. It needs only one supply voltage that can be acquired from main PSU. ...
.. schematic diagram of SMS remote control v3.0 (click to enlarge). The schematic diagram. This circuit is constituted by an AVR micro-controller ( ATtiny2313 ) at 4MHz, the GM-47 GSM module, a SIM card and 4 relays. The GM-47 module works at ...
.. usbasp -p atmega8 -U lfuse:w:0x9f:m -U hfuse:w:0xc9:m -U flash:w:firmware-avrusb.hex If your are familiar with a different AVR programming system you can of course use that one as well. But you'll probably have to do some minor ...
.. PCs via USB. LCD2USB was meant to be cheap and to be made of easily available parts. It is therefore based on the Atmel AVR Mega8 CPU and does not require any difficult to obtain parts like separate USB controllers and the like. The total ...
.. and avrdude (programmer) support the new chips as well but GCC doesn't. The GCC-4.1.0 has to be patched to support some AVR cpus incl. the attiny45. Get the latest avr device patches (patch-newdevices) e.g here . Uploading the firmware If ...
.. Linux USB project and the Linux i2c implementation The windows driver and test application are based on the libusb-win32 AVR-USB, a pure software implementation of USB for the AVR platform USBtiny, another software usb implementation for ...