Mike Mitchell EDN The power-up cycle of the supply voltage in embedded-system applications is sometimes not a clean event. This fact holds especially true in battery-operated systems, because the insertion of a battery often causes significant ...
General information In this article we will talk about a simple device that I designed for automatic control of additional LED lighting in the kitchen. Kitchen renovating and complete replacement of kitchen cabinetry are main reasons for ...
When you need an analog output from a microcontroller that does not have a digital-to-analog converter (DAC), you can connect an external DAC chip. But for a cheaper solution, use a pulse-width modulated (PWM) output and add a low-pass filter (LPF) ...
Analog Devices Circuit Note CN-0038 Circuit Function and Benefits This circuit provides a programmable gain function using a multiplying DAC and an operational amplifier (op amp). The maximum gain value and the temperature coefficient are set by ...
Introduction Data loss is a concern in telecom, industrial and automotive applications where embedded systems depend on a consistent supply of power. Sudden power interruptions can corrupt data during read and write operations for hard drives and ...
Abel Raynus EDN A microcontroller requires dc operating power in the 2 to 5.5 V range, an amount that a battery or a secondary power source can easily supply. However, in certain situations, a microcontroller-based product must operate directly ...
Francois AUGER Philippe Fretaud EDN Many previous Design Ideas [1, 2] have shown how to use the Charlieplexing technique [3] to drive as many LEDs as possible with a minimum number of I/O lines. This Design Idea shows how you can drive three LEDs ...
Andreas Freiherr VishayOpto Creating a “Magic” Cat Doorbell with the TSSP4P38 Proximity Sensor Leonie and her family live in a building with seven other families. Like many cats, Leonie loves to explore her surroundings, and after ...
Ricardo Jiménez and Juan C. Ángeles Electronic Design A basic microcontroller can be used to convert a sensor's analog output into a pulse train, thereby making the output compatible with standard digital I/O ports. When the need ...
An inexpensive way to implement high-resolution digital-to-analog conversion is to combine microcontroller-PWM (pulse-width-modulated) outputs with precision analog-voltage references, CMOS switches, and analog filtering ( Reference 1 ). However, ...